-
Anonymous users2024-01-24There are two reasons: 1. The angle valve or hose is blocked, resulting in unobstructed water flow, 2. The water pressure is too low, which is also easy to cause slow water flow.
This is because the plug has not been reset after you flushed the water last time, you can press the flush button again and hear a popping sound in the tank, that is, the plug is reset, and the water will not leak again, please accept.
Answer pro, hello, I am happy to answer for you, please wait a moment, immediately answer for you dear, when the toilet does not have the problem of water, we have to see if the water is off in your home or someone has turned off the water inlet valve, if this is the case, then no water must not be on the water, this you have to pay attention to the owners to see when the water comes or open the water inlet valve yourself. Of course, this rarely happens, but we can't rule it out, and we still have to check it. >>>More
Due to the importance and frequency of use of the toilet, slow drainage is a very troublesome topic. In addition to the reasons for later use such as clogged pipes and insufficient water pressure. Choosing the wrong toilet is also an important factor. >>>More
Check that after the toilet lid is closed, will it reach the inlet valve? If so, just adjust the orientation of the inlet valve and see if the float or float of the inlet valve will move up and down freely? This is the key because if you get stuck, the water can't get in Generally, the floating bucket has an adjustable crosseye You can adjust the height of the floating bucket, and you rotate it in the direction of the clock to see The problem should be solved If it doesn't work, find the manufacturer to check to see where the problem is.
If the toilet does not go to water, it needs to be manual, which may be a problem with the floating, or a problem with the inlet valve. >>>More