-
Anonymous users2024-01-24Yes, there is a collection of Nuan Xuan Xuan Library, it is really difficult to find, you can go to Douding Network to check the name of the drawing.
-
Anonymous users2024-01-23Generally, the left is hot and the right is cold, there is no fixed line, depending on the actual situation of the house!
It seems that there is no such standard stool as paulownia, and you can get there. >>>More
After designing the drawings of the pipe laying and confirming that the requirements are met, you can start laying the pipeline. The first step must be to find the main valve of the hot and cold water pipes and turn them off, and connect the inlets of the hot and cold pipes to a main valve, so as to facilitate the overall management. >>>More
Installation of hot and cold water pipes: 1. Generally, there are cold and hot water pipes in the bathroom. 2. The spacing between the hot and cold pipes should not be too close, and at the same time, the bathroom water pipes are all from the roof, which can reduce the probability of man-made damage. >>>More
Method 1: Close the main water valve first, and then put the faucet handle with a red and blue mark of about 8 mm, buckle it down, loosen the fixing screw counterclockwise with a flathead screwdriver, take off the handle, use a live wrench to disassemble the valve core of the faucet, open the upper part of the gland with a wrench, and take out the ceramic valve core inside. >>>More
You have to see whether your wash basin is a countertop basin or a column basin, 1. The countertop basin will first install the hot and cold water inlet pipe and drainage pipe on the basin, and put it directly on the countertop, and then connect the water inlet pipe to the wall triangle valve, and the drainage pipe is connected to the sewer pipe, open the valve to release water to see where there is no water leakage, and fasten it, and if there is no water leakage, the glass glue is put on the countertop last week, and it can be so after drying. >>>More