How to choose a squat in the bathroom?

Updated on Bathroom 2024-08-09
9 answers
  1. Anonymous users2024-01-24

    According to the pit spacing. The pit distance is the distance between the center of the drainage pipe and the back wall, and the size of the decoration tile must be set aside, which is about 600cm away from the wall. There are squatting pits with and without anti-water bends.

    The squatting pit with anti-water bend can be odor-proof, but the height is relatively large, and steps need to be made; It is not easy to block and smell without anti-water bending. When choosing, see if the drainage pipe is designed with a reverse bend, if the drainage pipe has a reverse bend, you can choose a straight flush.

  2. Anonymous users2024-01-23

    The squatting toilet is divided into split and conjoined, and the split is to add another elbow, and the conjoined is with an elbow. For family use, it is recommended to use a split squatting toilet to increase the elbow, although the conjoined body is easy to install, but the height and width are not as wide and deep as the elbow.

    There are many styles of squatting toilets, and it depends on personal preferences, and the squatting toilets will be much stronger when fired at high temperatures, and the glaze will be very bright.

  3. Anonymous users2024-01-22

    A few years ago, I opened a rice noodle shop in the university commercial street, and when I was decorating, I was squatting at the beginning, which felt too unhygienic, and then I opened a restaurant, and there were many people coming and going, and then I changed it to squatting, and the squatting I bought was self-cleaning glazed, so easy to rinse and clean. Then it is also pedaled, and the anti-water inlet is dug to prevent odor. The water tank is directly connected to the tap water pressure, and the water pressure is not small.

    As a dry catering, you have to be hygienic, and I often put some incense on the bathroom.

  4. Anonymous users2024-01-21

    In terms of the quality of squatting toilets, the first thing to choose is to choose a brand, mainly recommending domestic brands, because there are more and more beautiful styles. Secondly, whether it is high-temperature ceramics and whether it is self-cleaning glaze, so as to ensure that the squatting toilet is easy to flush and clean. There is also whether there is an anti-slip design at the foot of the squatting toilet, and another point is that the squatting toilet should be tested a little deeper, so that it is not easy to splash out.

    If the squatting toilet is selected, it is also necessary to choose a water tank that matches the squatting toilet, pedal flushing flush valve and hand press, if it is a family, it is recommended to install a water tank, 3-6 liters of flushing, energy saving and consumption; If it's a public place, consider both foot-operated flushometers and hand-pressed flushometers.

  5. Anonymous users2024-01-20

    Choose from the structure and site size of the squatting toilet, for the toilet with a sinking box, the height of the squatting toilet and whether it should be brought to the water trap should be considered when choosing a squashing toilet, if there is no sinking box, it is necessary to measure the size, open a good hole on the floor, use a PVC pipe to do a good job of water trapping, and choose a suitable size squatting toilet to connect it.

  6. Anonymous users2024-01-19

    In fact, the toilet was originally used at home, but the family has always raised a Shiba Inu, and I go out for a day, sometimes I will travel for a few days, no way, health is worrying, ruthless heart out of bleeding, and then changed to a toilet. My squatting is circular, auto-inductive, and I have a back-water bend, and the water flow is also very large. To be honest, it did cost a lot of money.

    But now my baby has learned to use squatting to go to the toilet, which is very gratifying. And it's automatic, and there isn't much smell at home.

  7. Anonymous users2024-01-18

    International brands such as American Standard, TOTO, etc., domestic well-known brands such as Huida, Wrigley, Shenluda, etc., there are also many small brands, it is recommended that you choose well-known brands, cost-effective. The way of squatting pit flushing is different. There are foot pedals, manual ones, water tank ones, and induction ones.

    The above-mentioned squatting pit brand manufacturers all produce supporting flushometers. Foot pedal type is commonly used in general engineering.

  8. Anonymous users2024-01-17

    Consider whether to add a water tank, or connect the tap water pipe to flush directly, I personally think that if the tap water pressure in your community is large enough, it doesn't matter, but if the pressure is small, it is best to match a small water tank, so that after each poop, the water flushed under the water tank forms an instantaneous large high-pressure water flow, which can be flushed cleaner (must have experienced the experience that the poop is particularly viscous and can not be flushed clean). So when buying, don't overlook these small details.

  9. Anonymous users2024-01-16

    Be sure to choose one with a reverse bend, that is, to prevent odor by accumulating water for a certain amount of water. In addition, there are two kinds of squatting toilets, shielded and uncovered, the sheltered squatting toilet will protrude out of a piece, personal advice is not good, now there is the kind of uncovered but with a cover, I personally think it is suitable for family use. In addition, there is a flow of water, one that rushes straight from the top, and it is not recommended.

    There is also a swirling stream of water formed from all sides, and when flushing, all the inside of the squatting toilet can be flushed.

Related questions
1 answers2024-08-09

The squatting toilet is originally a medium decoration, as long as the bathroom is tiled, paved with floor tiles, and then hung on the ceiling.

2 answers2024-08-09

First of all, according to the location of the sewage outlet of the purchased squatting toilet, the sewer pipe should be reserved at the appropriate position from the wall, and at this time, it is necessary to determine the distance between the entrance of the sewer pipe and the ground level. >>>More

1 answers2024-08-09

If you do this, it doesn't feel very reliable, let's lay bricks, now foam bricks are still very light, and it is easy to build!

5 answers2024-08-09

It's not too troublesome, the first step is to remove the toilet, knock off the floor tiles, and try to hit the low point, because there is a step in the squatting pit. The second step is to put the pit on it, or in its original position, flatten and fix it with bricks (use a water tank and install the water inlet pipe). The third step is to attach floor tiles. >>>More

2 answers2024-08-09

I guess the ventilation hole on the roof of the building is blocked.