-
Anonymous users2024-01-24I'll make a copy for you and see if you can use it:
There are two kinds of filters, one is relatively simple, it is plugged in the mouth of the toilet water pipe, and there is a circle of sides leaking out of the nozzle, just pull it out directly, and it does not affect the hose. The other is a joint with the inner and outer wires of the filter, the upper mouth is screwed on the toilet inlet pipe, unscrew off and connect the metal hose directly to the toilet inlet pipe, in fact, the filter on the toilet is not much use, it can be removed completely.
1. First of all, it is necessary to disassemble the water supply pipe of the angle valve to prevent accidents. >>>More
The toilet seat will turn yellow and crack after use, so remove it and replace it with a new one. So how do you remove the toilet seat? What are the precautions for removing the toilet seat? Let's take a look! >>>More
The bottom seal was not installed at first. The toilet needs to be removed and a new seal needs to be bought.
The filter in the teacup is generally only about 4 cm, this water will be flushed down, if the toilet is a little blocked, you can use a leather plucker to pull it out more than a dozen times in a row to unblocked.
Just disassemble it as you would normally dismantle other faucets, and turn the wrench counterclockwise through a gap at the root of it.