The toilet keeps getting water, what s going on?

The float switch is not well adjusted, when the cover is closed, the cover pushes the float down, which is equivalent to turning on the switch, and the water has been going in.

You can adjust the height of the water level. Lower the full water level by a few centimeters, and the position where the float is closed will be lowered, and the lid will not easily touch the float.

Check the water float, it may be that something is wrong with it.

They're all right, check the water float · Maybe it's stuck· It's good to fix it.

There's a reason why the float doesn't come up, if you look closely, you'll know.

The constant ingress of water in the horse rental barrel can be caused by several reasons:

1.The line in the tank is loose or worn, causing the tank to not close automatically. Check the line for loose or worn lines and replace them with new ones.

2.There is a problem with the fill valve inside the tank and needs to be cleaned or replaced. Check the fill valve for blockage or wear and replace it with a new one.

3.There is a problem with the water seal inside the toilet bowl, which causes the water to flow into the toilet bowl continuously. Check the water seal for jamming or frayed and needing to be repaired or replaced.

4.The internal ventilation line inside the tank is blocked, causing the water to not flow back to the tank properly. Check the internal ventilation lines for blockages, and if so, clean them up.

5.The button on the toilet seat is faulty, causing the water tank to not close properly. Check if the keys are damaged and need to be replaced with new ones.

In summary, the toilet bowl has been flooded due to problems inside the toilet, and some repairs or replacement work may be required. If you can't solve the problem by yourself, it is recommended to contact a professional plumbing maintenance personnel to deal with it.

The toilet bowl keeps flooding because the toilet's inlet valve is malfunctioning or clogged, causing the water to not stop entering the toilet. Here are the possible causes of water getting into the toilet all the time:

1.Inlet valve failure: The inlet valve is a critical component that regulates the flow of water, and if the valve is damaged or deteriorated, it will cause the water flow to not close properly. At this point, the valve needs to be replaced.

2.Problems inside the tank: There may be problems with the spare parts or connecting pipes inside the tank. If the flush button or rope mechanism is damaged or broken, it will also cause the water inside the tank to not easily stop flowing to the front stool.

3.Clogged water pipes: Sometimes, the inlet of a water pipe can become blocked, which can cause water to flow smoothly into the toilet. The inlet of the water pipe can be cleaned to ensure that the water can flow smoothly.

4.System installation issues: If there is a problem during the toilet installation process, it can also cause the toilet to not stop flooding. In this case, the toilet system needs to be reinstalled, the installation problem repaired, and the water stop flowing.

5.Too high water pressure: Too high water pressure can cause the water to stop flowing. To solve this problem, you can install a pressure reducer or change the plumbing of the water pipe.

To sum up, there could be a variety of reasons why the toilet keeps getting water. If the toilet keeps getting water, you can fix it in time by checking for these problems. If it cannot be solved, it is recommended to seek professional help to ensure that the toilet is in normal use.