After the house is renovated, what is the white fluff between the floor tiles of the bathroom?

Wall deformationCracking of tiles caused by wall deformation will show regular cracks in transverse, vertical or oblique directions. Precautionary measures: Before laying bricks on the light wall, ask the construction personnel to test the wall to see if the wall is installed firmly; Secondly, it is recommended to make a layer of steel wire mesh on the side of the wall tiles to improve the strength and load-bearing capacity of the wall. >>>More

Stains such as cement slag sticking to the ground can be removed with a shovel blade and then cleaned with detergent.

1. For glazed bricks, the glaze layer of the brick surface is a very dense substance, colored liquid or dirty things will not penetrate into the brick body, the pollutants of the brick surface can be removed by wiping the brick surface with a rag or adding some washing spirit, if it is a tile with a strong sense of concave and convex, the uneven gap squeezes a lot of dust, use a brush brush, and then rinse with clean water to remove the dirt on the brick surface. >>>More

If you don't want to change too much, it is recommended that the threshold stone at the door be slightly higher than the bathroom, so that after the laying is completed, you basically can't see that the tile of the bathroom is higher than the living room, and it also plays a role in blocking water. If the bricks of the bathroom are really not paved well, it is recommended to remove all the tiles of the bathroom and re-pave, after all, the tiles of the bathroom are relatively few, easy to change, and the amount of work is not large.

I do it by construction.

Bai law is not du >>>More