-
Anonymous users2024-01-241. a filter.
Many toilet refillers have a filter inside, and the filter will be clogged with too much limescale after being used for a long time, so that tap water cannot come in. Just remove the strainer and clean it.
2. a piston. Open the lid of the toilet bowl and observe that there is no water on the tank. Whether the piston can be plugged. If it can't be plugged, it will leak, the water tank is not satisfied, and the switch can't reach, so it won't be watered.
3. Float. Open the toilet lid to check whether the float sinks to the bottom when the water tank is empty, if it is still above when there is no water, it means that the float is broken, and it cannot sink and the upper water outlet is always closed, so there is no water.
4. a water inlet valve.
Check if the toilet lid will reach the inlet valve, and if so, adjust the inlet valve. Then look at whether the float of the inlet valve will move up and down freely, because if it is stuck, the water will not be able to enter.
The line or chain between the button and the drain has been disconnected and is ready to use once it is reconnected.
Water quality may cause the failure of the water parts, you can take off the water valve, clean it with clean water, and then press it repeatedly, and install it after recovery, but do not move the small scale next to him, otherwise it will affect the function and water volume of the toilet. If you still can't, contact after-sales. Generally, this thing can be guaranteed for three years.
Your toilet water part is broken, you need to replace a water part normally, I am in the Chaozhou toilet production base, these problems are very simple.
Check the main valve for tap water first, and then open the lid of the water tank to check the upper and lower water, it is possible that the drain of the toilet has blocked the foreign object. See if the piston can be plugged, if you can't plug the water tank, it will leak, and if the water tank is not satisfied, the switch will not reach the water. It is also possible that the plug of the plugging tank is broken, or the connection with the button is loose, which will lead to the phenomenon of no water.
The inside of the toilet is actually very simple, just a float, if the water does not come out, it may be that the float inside is broken, first release the water, and then buy a float to replace it.