-
Anonymous users2024-01-24Maybe the water leak damaged the socket before, it is recommended to find an electrician to take a look, after all, don't get it casually if you don't understand these things.
The leakage of the bathroom should also be dealt with in time, otherwise it is very dangerous to repair the socket and leak again.
-
Anonymous users2024-01-23If the line is damp and there is a short circuit, open the socket and dry it thoroughly with a hair dryer.
You connect an air switch to two wires, this method itself is not good, now there is a problem with one (room), even the other road (hall), the problem of the road (room) wire itself will not be short-circuited, you just need to check whether there is a problem with all the sockets on this line (room), if there is no problem, then check the connection of the line.
This situation is:
The first is that the wire of the switch is not connected well or is loose and leaks out of the outside causing leakage tripping, and the second is that the interface on the lamp is not connected well and leaks out of the outside causing leakage tripping >>>More
First unplug all the electrical appliances in the bathroom, and then go to close, if it is a leakage protector first reset in the closing (there is a small black square on the leakage protection plane, press it to reset), and then plug in the electrical plug after closing, which plug is plugged into the power off again is which electrical appliances have a problem, if the leakage is reset or can not close the switch, it means that the line is faulty, you can only find maintenance personnel, try it
If there is moisture leakage or a short circuit in your socket, please check them one by one, troubleshoot them, and then turn on the brake.
If the electricity in the bathroom cannot be sent, the power supply line should be checked, after all, the bathroom is more humid and the power line is more prone to problems. Connect the toilet to afford to disconnect the power supply separately, check which appliance can be sent after disconnecting the power line, and then focus on checking the wire connected to the appliance and it.