-
Anonymous users2024-01-24Shower room or partition.
If the partition is used, it is generally ordinary tempered glass, that is, building tempered glass, the strength can be but in case of broken particles will be large, with sharp angles, it will slightly hurt people.
For shower rooms, good manufacturers are tempered safety glass, requiring more than 40 fragments within the range of 50mm*50mm after the glass is broken. Shower room manufacturers with high quality requirements will use automotive-grade tempered glass, and there are more than 60-80 fragments in the range of 50mm*50mm after crushing. The fragments are obtuse angled, basically will not hurt people, sometimes people standing too close may have slight scratches, but there will be no danger, tempered glass will not be broken is actually misleading consumers.
That's impossible. It can only be said that the quality is good, the higher the probability of crushing, the greater the bearing strength.
The original glass film in China is Shanghai Yaopi and CSG Group, followed by Yaohua.
The highest safety index is recommended to be pasted with explosion-proof film. However, the cost is very high, and it will wear out after a long period of use.
Hope the above answers can help you.
-
Anonymous users2024-01-23There will be tempered glass factories, if you are afraid of breaking, use thicker, if you are working in the bathroom, no matter how thick the glass is, you are also afraid of it, and there is a kind of laminated one
-
Anonymous users2024-01-22It is better to choose the glass of Qinhuangdao Yaohua Glass Factory, and there are many safety glasses suitable for toilets.
It is often said that tempered glass is a kind of glass, the thickness is better than 10mm, and the glass is a small piece after it is broken, which will not hurt people too much.
Then there is the tempered clamp and glass, which cannot fall off after breaking, and you can choose transparent and opaque anti-vandal film with high cost.
Two-layer diamond glass, with glue or adhesive strip edge sealing, the effect of isolation is very good, especially blurry, double-layer edge sealing also has a certain sound insulation effect, provided that your door is 8mm, otherwise two pieces of minus 4mm glass can not be put in.
Waterproof coating, but the general bathroom is still tiled, and the ceiling is an integrated ceiling.
Lightweight bricks use aerated blocks to build the wall, before starting to build the wall, determine the position line at the floor position, and play the line, and then chisel the original ground leveling layer, and then vertically plant a few ribs on the floor surface and pull them with steel bars laterally, and then pour them with fine stone concrete, which is for the waterproof and leakage resistance of the bathroom, and then use lightweight bricks to build the wall on the top after the concrete is dry, and then use light bricks to build the wall after the wall is painted, and then do a good job of waterproofing the bathroom on the wall and floor before sticking to the wall and floor tiles, so as to ensure that the water and moisture in the bathroom do not go to the room.
You can't use ordinary white glass, it is recommended to use tempered glass above 20 cm, you can consult the glass store.
The bathroom is a relatively private place, when going to the toilet or bathing, it can not be exposed to people's sight, and there needs to be an object to block it, for this reason, some families use a window equipped with frosted glass or a window sticker on the window, although it can play a good role in blocking the line of sight, and is not afraid of being wet with water, but it is not conducive to aesthetics and air permeability.