-
Anonymous users2024-01-24Punch holes, put screws. You have to find a master for this. Why don't you buy plastic? Plastic is durable. Stainless steel is easy to rust in the bathroom. This is a situation that I have personally used. , adopted
-
Anonymous users2024-01-23Use a percussion drill to drill a 6mm hole, put a glue nail, and install the box lock wooden tooth screws.
Basically, most of them are 201 stainless steel, very few of them are 304, most of them are fooling people, the cost of 304 is very high, and a tissue box is rarely made of 304 stainless steel.
Because of the high humidity in the bathroom, the general glue will fail after a long time.
This one key is equipped with a lock, and if you drop it, you can only force it open, or you can think about where it was dropped, and then look for it to see if you can find it.
If you have a thinner, you can use a cotton cloth dipped in some thinner to rub it, and if you don't have thinner, you can also use kerosene, gasoline, etc.
It is recommended to have both, put the unused box and dump the waste paper, the former is a waterproof measure, and it is not waterproof after that, but it should be convenient to take the plastic bag, the purpose of which is to reduce the risk of blockage of the drain.