-
Anonymous users2024-01-24Yes, solid wood floor heating floors are dried to less than 8% moisture content when drying, not less than 6%. Solid wood flooring for geothermal environment, heat treatment time, constant temperature are stricter than the solid wood floor used in ordinary environments, I use Jiusheng for decoration, go and see it.
-
Anonymous users2024-01-23It is more important, it will affect the flatness and gaps, I heard that it is too dry for fear of cracking, and too wet will affect the effect of floor heating.
-
Anonymous users2024-01-221. Be sure to find a construction team with professional knowledge of floor heating. "Three points of flooring, seven points of installation", the effect of the amateur decoration team is self-evident.
2. The tightness of the floor heating system must be checked before paving.
3. The ground must be dry (it can be judged by experimental phenomena), and the moisture content of the cement floor should be lower than that; The indoor humidity should not be too large, regardless of whether there is geothermal heating, the ambient humidity is about 60 degrees before and after installation.
4. It is strictly forbidden to nail the ground during construction. After the construction is completed, nailing is also prohibited on the ground to prevent damage to the heating coil.
5. Before laying the laminate floor, the EPE composite film should be laid (the EPE composite film must be marked with the words special for floor heating radiation) to isolate the moisture and release the moisture from the surrounding baseboards.
1. Moisture content of sports wood flooring.
The moisture content of sports wood flooring is the material characteristics of sports wood flooring is that the water content value directly affects the strength and volume of wood, and the moisture content of wood is the ratio of the weight of moisture contained in wood to the dry weight of wood, also known as moisture content. >>>More
The moisture content of parquet should be the same as that of the residential installation area, so that the possibility of problems in future use will be greatly reduced. The national standard stipulates that the moisture content of wood flooring is 8% 13%, and the moisture content of the selected parquet in the exhibition hall is measured when purchasing, and then the moisture content of the wood floor of the same material and specification is not opened, if the difference is +2%, it can be considered qualified.
1. Classification of moisture content of sports wood flooring. >>>More
The national standard stipulates that the moisture content of wood flooring is 8%-13%. In fact, China has a vast territory, and the moisture content requirements in different regions are different. The floor moisture content in the northern part of China is 12%, and the floor moisture content in the southern region should also be controlled within 14%. >>>More
In order to ensure the quality of sports wood flooring, professional sports wood flooring and stage wood flooring need to maintain a balanced moisture content. The moisture content of the sports wood floor is controlled at 6%-14%, and the performance is stable. Due to the large difference in climate between the north and the south of China, the balanced moisture content requirements of the sports wood floor in the stadiums in the north and south are different. >>>More