-
Anonymous users2024-01-24What are the ways to repair the toilet.
1.First of all, you can lift the floating arm upwards, if you find that the water will not flow, it means that the float has not been lifted to the corresponding position; If the valve plunger is pressed into the float valve, or the float is rubbed against the box wall, then the float arm needs to be twisted to make the float leave the side wall of the box.
2.Generally speaking, sometimes the weight of the water will prevent the float from rising properly, so you can rotate it counterclockwise to drop it off the end of the float. If there is water, the water should be shaken off and put back on the float arm again, and if the float is damaged, it should be replaced with a new one.
3.The air temperature of the smart toilet is not hot (other normal) Inspection part: (drying device, computer board) Exclusion method:
Measure whether there is 89+ -4 ohm resistance at both ends of the heating wire frame, if not, the drying device is broken, if so, confirm the correct seating, press the drying button to measure whether there is 220V voltage at both ends of the heating wire frame socket, if there is no voltage, the computer board is broken. If the dryer is replaced, the computer board should be carefully inspected. Remarks:
If the short circuit between the motor slots sometimes slows down due to the increase of load, resulting in an open circuit of the heating wire frame, it will also lead to the scorching phenomenon of the computer board D882, then please replace the computer board and the drying device at the same time.
4.The bucket tank does not contain water, probably because the pressure of the tap water is not strong enough. Another thing is to check whether the filter screen out of the inlet valve is blocked by the filtered debris.
If yes, just get rid of the clutter. Remember to clean up the debris from the filter regularly in the future. In addition, check whether the sealing ring inside the water valve body has fallen off, or there are debris such as sediment.
If the sealing ring falls off, reinstall it and remove the debris.
Some of the damage to solid wood furniture can be repaired in some small ways. For example, if the paint color becomes dark and has no luster, the methods that can restore the gloss of the paint surface are: first, add a quarter of vinegar with a glass of water and wipe it with a soft cloth; The second is to wipe lightly with a soft cloth soaked in alcohol or toilet water or tea, or it can be treated with wood essential oil. >>>More
The toilet is one of the sanitary ware that we use more frequently in our daily life, and it is inevitable that there will be some problems when used frequently; So what to do if the toilet leaks? What are the maintenance methods? Let's introduce it to you, let's find out together! >>>More
1. Repair method of toilet tank leakage.
1. The toilet tank is leaking, generally we open the lid of the water tank first, and observe what position the water scoop is in when the water inside the tank is full. If the water inside the tank is full and the tank is still flooding, then the tank will definitely leak. At this time, the fault appeared on the water scoop. >>>More
Blockage: If it is a simple blockage, you can use general tools to solve it yourself, if it is a hard blockage, you need to find a professional to repair it. >>>More
White latex, nails, adhesives are indispensable. Sticky patching, digging irregular holes, cracks, and pits into regular ones, removing the badly moth-eaten and rotten ones, and filling up good ,......