How to replace the toilet flush steps

Updated on Toilet 2024-08-04
3 answers
  1. Anonymous users2024-01-24

    Drain the water, remove the old one, replace it with a new one, and debug the height capacity.

  2. Anonymous users2024-01-23

    Dear, I'm glad to answer for you: toilet tank water drift replacement steps: 1, first of all, I am shopping online or buy a set of water tank spare parts water bleaching valve in the bathroom store, the general price is about 30 yuan, but it depends on what your own toilet model is, you have to buy the same, otherwise the size can be inappropriate in many places.

    2. Cut off the water source first, put the water in the toilet tank clean, different toilet forms The replacement method of the toilet tank is different. 1. First take out the old water tank water valve, and then take out the upper part of the lower drainage kit, which is convenient for the replacement and installation steps. 2. Then let the upper and lower parts separate.

    3. When the screw in the lower part is exposed, loosen the screw first, but do not need to take it out. 4. In the middle, there is a slotted iron piece of arc and put it on the outside and bottom of the water tank. 5. Put the bottom of the water valve right, concentric with the drainage hole 6. Make the iron sheet at such an angle and tighten the screws.

    7. Return to the direction of the upper and lower parts of the dismantling, and install the upper part of the sleeve. 8. Remove the base and nut of the inlet valve. 9. Align the water inlet hole of the water tank and insert it into the lower end of the water inlet valve.

    10. Put on the plastic gasket and nut and tighten it firmly. The key here is that there must be a gasket, and the calendar must be tightened, or there will be no leakage. Anyway, all the accessories you send must be used.

    11. Connect the water inlet hose of tap water and tighten it.

  3. Anonymous users2024-01-22

    Toilet Tank Float Replacement Steps:

    1. First of all, it is to buy a set of water tank spare parts in the bathroom store, the general price is about 30 yuan, but it depends on what your own toilet model is, you have to buy the same, otherwise the size can be inappropriate in many places.

    2. Cut off the water source first, put the water in the toilet tank clean, different toilet forms The replacement method of the toilet tank is different, and the following will explain the replacement method of the conjoined toilet water drift.

    1. First take out the old water tank water valve, and then take out the upper part of the lower drainage kit, which is convenient for the replacement and installation steps.

    2. Then let the upper and lower parts separate.

    3. When the screw in the lower part is exposed, loosen the screw first, but do not need to take it out.

    4. In the middle, there is a slotted iron piece of arc and put it on the outside and bottom of the water tank.

    5. The bottom of the water valve is placed squarely, concentric with the drainage hole.

    6. Make the iron sheet at such an angle and tighten the screws.

    7. Return to the direction of the upper and lower parts of the dismantling, and install the upper part of the sleeve.

    8. Remove the base and nut of the inlet valve.

    9. Align the water inlet hole of the water tank and insert it into the lower end of the water inlet valve.

    10. Put on the plastic gasket and nut and tighten it firmly. The key here is that there must be a gasket, it must be tightened, or it will not leak. Anyway, all the accessories you send must be used.

    11. Connect the water inlet hose of tap water and tighten it.

Related questions
How do you replace the faucet if the gap at the bottom of the kitchen sink is too small?
2 answers2024-08-04

1. Find the main valve of your water pipe and turn it off. 2. Buy a faucet with the same number as your faucet. 3. Directly remove the broken faucet, and it is best to wrap it slightly with hemp rope at the screw mouth to prevent water leakage. >>>More

What are the steps to replace the security door to replace the security door
2 answers2024-08-04

The water and electricity can be replaced after the change, and the protection can be done during the decoration process. If the rear installation will affect the progress of the decoration, for example, how to measure the size of the bread pass, there is no anti-theft door how high the ground is, brick laying and ground leveling are affected, if it is an old house, the door in the kitchen is generally installed before the mason, and the side may have to be tiled on the side.

Let's talk about what to do if the toilet water is broken
1 answers2024-08-04

You can go to the kitchen and bathroom dealership to buy accessories for replacement. Bring the original accessories with you when you go, compare them and buy them later!

What should I do if the water on the toilet bowl that automatically stops is not good?
6 answers2024-08-04

1.To check whether the water in the toilet tank is stuck, we first open the water tank to check and remove obstacles. 2. >>>More

How to replace the Mopu smart toilet replacement button?
6 answers2024-08-04

How to replace and install a smart toilet seat by yourself, the toilet seat at home has been yellowed after three or four years of use, and it should also be replaced from the perspective of health ,..