My home has been renovated for more than a year, and there are many scratches on the floor tiles in

Updated on Living room 2024-08-07
4 answers
  1. Anonymous users2024-01-24

    It is estimated that the wet part of the fiberboard has been covered for a long time, and it has not been wiped off in time, and the color has been absorbed into the surface of the tile, rather than the black that comes out. Man-made things have a certain density, even if it is glass, the surface has capillaries, so not to mention tiles. Even no matter how good the brand is, no matter how good the ceramic tile is, the surface will have problems in the harsh environment for a long time, and the good brand will resist for a long time, and vice versa!

    It takes about 50 days from the laying of the bricks to the end of the renovation of the apartment, which is not surprising due to this phenomenon! So you have to be careful in life.

  2. Anonymous users2024-01-23

    This is a substandard quality seepage brick, high water absorption, and very poor stain resistance, the water to wipe the floor is not clean, it is easy to cause this situation. Unless you wipe it clean and put a layer of ultra-clean bright, but a bottle of ultra-clean and bright will cost more than 60 pieces, and it will be sprayed more than 1 meter with a validity period of about 2 years.

    If it is feasible, go to the after-sales technician of the manufacturer who makes the floor tile to come and see the situation, and the compensation will be compensated.

  3. Anonymous users2024-01-22

    Scratches? Could it be high heels or other hard objects?

    Are you sure it's blackened? Is it a large area or a part of the area?

    Under what circumstances did you buy the bricks? If you are not confident in the bricks, it is not surprising that there are quality problems. You get what you pay for.

    Pipeline water seepage ...... can also be consideredConcealed works.

  4. Anonymous users2024-01-21

    This must be a problem with the quality of the tiles.

Related questions
1 answers2024-08-07

One of the reasons may be that the original tiles were not checked when the original wall was hollowed out, and the second reason was that the proportion of cement mortar in the paving of the master was wrong, and less cement and more mortar would also cause a loose hollow drum. The only remedy is to replace the bricks, and then add tile glue when paving, so that the viscosity will be higher.

3 answers2024-08-07

If it is really the smell of gas, there should be a slight leakage, otherwise there can be no smell of gas. It is recommended to close the cabinet door for 24 hours before testing. I hope my answer can help you.

7 answers2024-08-07

What is the odor, is it from the drain or the floor tiles?

3 answers2024-08-07

It is best to treat the exceedance, and at present, the treatment product is the best Otsuka chemical formaldehyde scavenger of Lance Cage, after all, the technology in Japan is relatively mature, and it is used in many public places, so you can learn about it.

1 answers2024-08-07

1. It's all about bricks. In addition, when sticking bricks in the kitchen and bathroom, it is necessary to pay attention to the problem of moisture and waterproof!! >>>More