-
Anonymous users2024-01-24It can be erased with wind oil essence with traces. Materials required: wind oil essence, paper towels.
1. For the traces of ink on the table, you can use wind oil essence to remove, as shown in the figure below.
>2. Rush the wind oil essence drips on the traces on the desktop, as shown in the figure below.
>3. Stay for a few minutes after dropping the wind oil essence to fully decompose the traces, and the cultivation is shown in the figure below.
>4. Find a dry towel to wipe the ink traces back and forth, as shown in the figure below.
>5. In this way, the traces can be removed, as shown in the figure below of the state judgment.
-
Anonymous users2024-01-23It can be erased with wind oil essence. Materials required: wind oil essence, paper towels.
1. For the traces of ink on the table, you can use wind oil essence to remove, as shown in the figure below.
>2. Rush the wind oil essence drips on the traces on the desktop, as shown in the figure below.
3. Stay for a few minutes after dropping the wind oil essence to fully decompose the traces, as shown in the figure below.
>4. Find a dry towel to wipe the ink traces back and forth, as shown in the figure below.
5. In this way, the traces can be removed, as shown in the figure below.
-
Anonymous users2024-01-221. To remove ink stains, you can first rinse with water or scrub with detergent. If there are still traces, it can be used.
Dissolve 5 or 6 capsules of acetic acid in a tablespoon of hot water to make the stain fade.
2. Full coverage The painted surface of fully enclosed furniture can be used to absorb water with a dry cloth or paper towel, and then wipe it with a wrung out rag, which will generally not leave a mark;
3. The surface treatment of semi-closed or fully open lacquer furniture is more complicated, try it with the method first, then use sandpaper sand again after becoming lighter, and then make up the color and spray the floor paint;
-
Anonymous users2024-01-21When writing, there is a correction fluid that can remove the ink with a single stroke, and it should be possible to apply some ink on the table.
The best way to do this is to scrape the table top again with a planer and then paint it again. But this method is too complex and requires specialized workers. You just lay a tablecloth, high-grade, and cover up the ugliness! Or buy a couple of coasters. Hope it helps.
1. Light-colored solid wood furniture, you can choose to use wax to repair scratches, first of all, you need to treat the wax, that is, scrape the wax into powder particles and then evenly apply it to the scratches, and then heat the wax powder particles applied to the scratches to let the wax fully melt, and then dispose of the excess wax (the wax that oozes scratches) and wait for the wax to cool slowly, and then observe the scratches are not obvious. >>>More
Let's find a manufacturer to repair or professional furniture repair. >>>More
If you have a saw, cut it evenly along all four sides, polish it when you're done, and then buy some paint and spray it.
Buy a placemat and put it on! Don't put the dishes directly on the table.