-
Anonymous users2024-01-24According to the construction experience of the master, the cracks are divided into structural cracks and cracks, the structural cracks are transverse or longitudinal extension lines, which is the problem of the wall itself, the cracks are too thick in the construction process, and the cracks will also appear in the drying process, if a single batch scraping is normal within the range of 2mm, there are still cracks, which is a problem with the product itself, so it is best to scrape the whole with caulking special products, and there is a common method on the market to scrape the wall stickers. Generally, the self-cracking of cement-based products will be more obvious because of the high strength, but the performance of the cement-based products will be improved after adding sand and gravel aggregates.
A good mortar product can be scraped in a single batch at a thickness of 2cm without cracks. Cracks in the material are avoidable, but structural cracks are inresistible. Pay attention to the thickness of the batch scrape!
At the same time, pay attention to the humidity of the construction environment, sometimes it is easy to cause cracks if it dries too quickly.
Your situation can be a structural crack, and cracks will still appear in the later stage.
-
Anonymous users2024-01-23The ceiling can be dismantled and redone, and if the foundation of the wall is settled, there will be no rut.
Use latex paint to fill.
If you want to avoid the cracking of gypsum line joints to the greatest extent, you must pay special attention to the acceptance of the ceiling base process: 32313133353236313431303231363533e78988e69d8331333433626432. It is better to avoid plaster lines being installed on wooden boards, and the quality of the paint on the walls should be acceptable. If every link is done well, cracks still appear due to thermal expansion and cold contraction. >>>More
It is understood that many owners like to use gypsum board to decorate when making ceilings, which is both good-looking and easy to construct, but gypsum board ceilings have a fatal shortcoming, that is, they are easy to crack. So what should I do if there are cracks in the gypsum board ceiling in the living room? Let's take a look! >>>More
1. Analyze the causes of cracks.
After the crack appears, you should first analyze how the crack is generated, find out the problem pipe fittings, and then formulate a rest plan, not blind construction. Otherwise, it may fall into a vicious circle of cracking and mending. >>>More
There is a special patch of tile gaps white stone powder to try.
If you want to make up for this, you can only continue to make up for it. >>>More