-
Anonymous users2024-01-24If it can be changed on the 1st floor, if it is necessary to negotiate with the neighbors on the 2nd floor, including the 2nd floor, it is not allowed, do not change it as much as possible, if it is a large-scale shift, the floor should be raised, and the pipeline should have a certain slope, but the distance should not be too long, the distance is long, the slope of the pipeline should be larger, and the ground elevation will increase, which will affect the flushing effect.
-
Anonymous users2024-01-23If it is on the first floor, it can be changed, and if it is on the second floor including the second floor or above, it is necessary to consult with the neighbors.
The bathroom of home decoration often encounters a troublesome problem, that is, the toilet drain of the bathroom is not very suitable, and the decoration design needs to be painstakingly conceived if it is renovated for the convenience of use. Four common ways to remodel your toilet drain teach you how to move your toilet drain pipe.
Displacement of a small area:
Use a special shifter for lifting, there is CM, it is recommended not to exceed 10CM shifter, which will affect the effect of punching and draining.
Wide range of displacement:
Floor elevation (generally 20CM high), discharge pipes, pipes should have a certain slope, but the distance should not be too long, the distance is long, the slope of the pipeline should be larger, the ground elevation will increase, and the flushing effect will also be affected. The drain pipe can be connected to the original pothole, and can also be connected to the sewer main pipe with 3 passes.
-
Anonymous users2024-01-22The downspout of the sink is made of 50 PVC, which should be retrofittable.
-
Anonymous users2024-01-21You can change the location, this job has to ask the plumber you are looking for, look at his suggestions, you say to change the location to see without affecting the smoothness, you can get it.
-
Anonymous users2024-01-20The main drain can also be repositioned, which can be solved by using a shifter, but it is not recommended to change the large size.
-
Anonymous users2024-01-19You can change the location, but you need to consider the following:1Compliance with building codes and safety standards.
2.Whether it is necessary to remove the original floor or replace the wall, and whether it is necessary to re-surface the floor or wall. 3.
Whether the restroom equipment and furniture need to be rearranged to accommodate the new sewer location. 4.Whether equipment such as water pipes and electrical wiring needs to be reinstalled.
5.Whether it is necessary to apply for the relevant building permits and approval procedures. Therefore, if you want to change the location of the toilet sewer bend, it is recommended to consult a professional renovation company or engineer first to ensure that the renovation process is safe and reliable, and meets the relevant regulations and standards.
It is recommended that the main pipe enter the bathroom and kitchen separately with a tee, and install a water stop valve before entering, which is conducive to maintenance.
This is a common pipe root leakage, you need to remove the toilet, re-seal the pipe root with the plugging king, ensure that there is no leakage, and then reinstall the toilet after installing the sealing ring.
Thin pipe – the overflow pipe of your home electric water heater or solar water heater. I guess, you'd better take a full-picture picture.
In addition to the brick and tile package in the early stage, there are the following ways for the toilet sewer pipe package riser: >>>More
The bathroom water pipes include PPR water pipes, PVC sewage pipes, buried pipes and open pipes, so you should be more rigorous in your speech.