The home needs to be renovated, and now the kitchen and bathroom need to be waterproof, and the floo

The ground can be waterproofed membrane, and the wall can be waterproofed mortar; That's how the craft is on our side.

You have to roll the wall on the wall, the mason will be more troublesome to paste the wall tiles...

The process is a little different in each place, and I heard that Beijing has a spray waterproofing agent.

The normal handover bathroom should have been waterproofed. If there is a floor drain in the kitchen, it should also be done, and if there is no floor drain, it is generally not done. You can choose to do it or not.

Do a 24-hour closed water test first to see if there is any leakage downstairs. If there is a leak, then the developer should repair it. The waterproofing project should be guaranteed for 5 years.

The waterproof material can be used Oriental Yuhong brand, and the quality is good. In addition, the Golden Shield and the 911 are also very good.

There are several points to do waterproofing:

1. The base layer should be dealt with: if the water circuit is changed, it needs to be noted, the position of the wall groove should be waterproof first and then go to the pipe, the ground should be leveled with waterproof mortar, and the intersection of the floor and the pipeline and the junction of the surrounding wall and ground should be treated tightly with plugging spirit. This kind of place is the focus of leakage.

The junction of the wall and the ground should be beveled with mortar to prevent the deformation and fracture of the waterproof mortar.

2. The waterproof of the shower area should be 1800mm, and the other places should be 300mm. Do it three times.

3. After the waterproof last night, do a 24-hour closed water test again to check whether there is leakage.

4. Cement mortar leveling, and then paving the surface layer.

5. The door must be made of door stone, the whole stone, usually the finished surface is 5mm higher than the bathroom floor. Prevent water from running indoors and causing damage.

Key points: 1. Closed water test; 2. After removing the grass, do waterproof first and then go to the pipe (the general decoration team does not pay attention to this); 3. Three times waterproof, 1800mm, 300mm two numbers; 4. Doorstone.

You can choose waterproof mortar, no matter what brand you choose, you must find an environmentally friendly one, non-toxic and tasteless.

It is important to note that:

The base layer should be dealt with: if the water circuit is changed, it needs to be paid attention to, the position of the wall groove should be waterproof before the pipe, the ground should be leveled with waterproof mortar, and the intersection of the floor slab and the pipeline and the junction of the surrounding wall and ground should be treated tightly with plugging spirit. This kind of place is the focus of leakage.

The junction of the wall and the ground should be beveled with mortar to prevent the deformation and fracture of the waterproof mortar.

One is to use waterproof coating or other flexible waterproof materials for local treatment at the root of the pipe, and use mortar waterproofing agent to do a good job of the ground and waterproof layer and then veneer the brick, this method can be waterproof for up to 25 years, and it is not easy to penetrate Recommended.

One is to paste the tile after the tile gap treatment is dense, dry and use the surface spray type waterproof agent to spray or paint the tile gap, the construction is simple, you can operate according to the manual, the waterproof period is about 6 years.

My home waterproof is the use of Beijing Dayu Shengong water must be prevented, this is a waterproof product specifically for the kitchen and bathroom, I was in their manufacturer's Taobao camp store to buy, they provide a set of waterproof solutions according to the actual situation of my home, very practical, you can learn about it.