I wanted to repaint the walls because of the new furniture. But the wall is uneven, ask for steps.

1. Clean the wall: use a shovel to remove the loose putty layer on the wall. The putty layer that cannot be removed with a shovel can be gently tapped with a small hammer, and if there is no hollow drum sound, and the place that is still not loose after knocking can retain the original base layer.

2. Clean the wall: clean the floating dust and oil on the surface.

3. Repair the wall: use water-resistant putty to repair the local damaged parts and level the entire wall.

4. Paint the primer: After the putty layer is fully cured and solidified and dry, apply the primer 1-2 times to prevent leakage.

5. Brush the topcoat: After the primer is completely dry, apply the topcoat twice. It is forbidden to mix too much water when the paint is painted, especially the dark color paint mixed with too much water may lead to undesirable phenomena such as floating color and blooming.

It is recommended that you use gypsum-based finished putty after shoveling off the wall, and you can use it after adding water and stirring without adding glue.

1 batch of ash, 2 sanding. 3. Brush latex paint.

Tell you,In this way, it's okay not to paint and paste wallpaper.,If you have to paint it, you can only use paper to paste it up first, and then brush.,Only in this way, otherwise you can fill the potholes with ash.,But the latter is not good to paint.,It's troublesome.,I hope my opinion.。