What should I pay attention to in the care of parquet?

The stability of multi-layer parquet is higher than that of solid wood flooring and laminate flooring, and the method of maintaining multi-layer parquet is very simple, usually you can use a vacuum cleaner or broom to sweep the surface dust, and then wipe the surface of the floor with a rag or mop that is wrung out after soaking until it does not drip. It is best to open the doors and windows after mopping the floor to allow air to circulate and dry the floor as soon as possible. In winter, the weather is humid, it is best to choose a sunny day to clean, which can prolong the life of multi-layer parquet.

If the wear-resistant layer of multi-layer parquet is damaged, the moisture-proof function and brightness of the floor will be affected. Therefore, when walking on the floor, you should try to wear cloth slippers, of course, everyone wears cloth slippers in winter. In addition, the furniture with feet should be pasted with a soft-bottom protective pad to avoid the feet of the furniture from scratching the wear-resistant layer of the floor; Do not use sandpaper, sanders, steel brushes, strong stain removers, alkaline liquids and metal tools to clean multi-layer parquet; Light-colored multi-layer parquet can be wiped directly on the floor with a rag and rice water, and the floor will be much cleaner.

Hope that helps.

Ruicheng flooring is at your service.

1. Keep the floor dry and clean, and it is not allowed to mop the floor with a dripping mop, or wipe the floor with alkaline water or soapy water, so as not to damage the gloss of the paint surface; If the air in your home is dry, make the mop wetter or put a basin of water on the heater or humidify it with a humidifier.

2. Try to avoid sun exposure, so as to avoid long-term aging and cracking of surface paint under ultraviolet radiation;

3. If there is an oil stain, you can use a rag dipped in warm water to scrub with a small amount of washing powder, if it is a drug or pigment, it must be removed before the stain penetrates into the wood surface;

4. Try to avoid long-term contact with water on the floor, especially not with hot water, so once there is hot water sprinkled on the floor, it should be dried in time;

5. It is best to wax every three months, and clean the stains on the surface of the floor before waxing. In fact, it is okay not to beat, but it can be waxed frequently, which can maintain the finish of the floor and prolong the service life of the floor.

6. Avoid sharp objects scratching the ground, do not throw cigarette butts or directly place things that are too hot on the floor, and try to avoid dragging heavy furniture.

Vacuum with a vacuum cleaner, wipe with a semi-damp cloth and mop, pay attention to the mop should not be too wet, it should be wrung out before use. The surface of the composite wood floor has a very thin layer of crystalline aluminum oxide wear resistance, the destruction of the wear layer will cause damage to the floor, if the conditions permit, you can also apply a layer of floor wax at intervals to strengthen the protection of the floor. If the paint surface is damaged, you can repair it with ordinary varnish or ask the manufacturer to repair it.