-
Anonymous users2024-01-24"1. Pneumatic water-saving toilet. It is to use the kinetic energy of the inlet water to push the impeller to rotate the compressor to compress the gas, and use the pressure energy of the inlet water to compress the gas in the pressure vessel, and the gas and water with higher pressure first flush the toilet strongly, and then flush it with water to achieve the purpose of saving water, there is also a float valve in the container, and the float valve is used to control the water volume in the container not to exceed a certain value.
2. Water-saving toilet without water tank. The inside of the toilet is funnel-shaped, and there is no water nozzle, flush pipe cavity and anti-odor elbow. The toilet drain is directly connected to the sewer.
There is a balloon at the toilet drain that is filled with liquid or gas. A suction pump on the outside of the foot-operated toilet inflates or contracts the balloon, opening or closing the toilet drain. Use the ejector above the toilet bowl to flush away any remaining dirt.
The present invention is water-saving, small in size, low in cost, not blocked, and has no running and dripping phenomenon. Fit for the needs of a water-saving society.
3. Water-saving toilet for wastewater reuse. It is mainly a toilet that reuses domestic wastewater, and at the same time pays attention to the cleanliness of the toilet bowl without reducing the degree of cleanliness, and all functions remain unchanged. "
-
Anonymous users2024-01-23The simplest way is to fill the tank with water and fill it with a screw-on lid filled with water.
-
Anonymous users2024-01-22The state has a water-saving certification for the sanitary ware industry, and everything with water-saving certification can be used. The national standard saves up to six liters of water.
-
Anonymous users2024-01-21Now the mainstream of the toilet has a jet siphon flushing method, and some are ultra-thin water tank designs, you can refer to a few brands, Kohler, American Standard, Lejia, Roca Sanitary Ware, first learn about it from Taobao or the official website.
-
Anonymous users2024-01-203 6 liters. Top press, high point of the tank.
1. Pneumatic water-saving toilet. It is to use the kinetic energy of the inlet water to push the impeller to rotate the compressor to compress the gas, and use the pressure energy of the inlet water to compress the gas in the pressure vessel, and the gas and water with higher pressure first flush the toilet strongly, and then flush it with water to achieve the purpose of saving water, there is also a float valve in the container, and the float valve is used to control the water volume in the container not to exceed a certain value. >>>More
The effective water consumption of the whole discharge does not exceed 6LThe water consumption of the half discharge does not exceed.
Each has its own advantages and disadvantages, and it can be conjoined or split
There are many decoration styles, and there are many styles of tiles.
The water in the toilet bowl is a water seal, it is to seal the smell, and the water sealed is easy to splash on the buttocks, you can put two pieces of crepe paper on the water surface before defecation, which can effectively prevent splashing. If you want to change the toilet, there is a toilet with an invisible water seal, and the water cannot be seen on the surface, so it is impossible to splash water, but this kind of toilet is not easy to flush, so there are not too many on the market now.