The toilet button can t pop up, and it keeps running water, how to solve it

Updated on Toilet 2024-08-31
3 answers
  1. Anonymous users2024-01-24

    Move the lid to a position where the button can jump up, and if this happens, the device is old. You can adjust it in this way and continue to use it, or you can consider changing it to a new one.

  2. Anonymous users2024-01-23

    Netizens didn't notice that it didn't bounce up, and then it kept ringing, and when I looked at the water all over the ground, I couldn't see where the toilet was leaking.

  3. Anonymous users2024-01-22

    I just can't get back and keep leaking.

Related questions
7 answers2024-08-31

Remove the back cover of the toilet bowl and turn it counterclockwise to check for foreign objects in the gap between the circlip sleeve and the button. If there is no foreign object in the gap between the surface, press the button with your finger to feel if there is still a slight rebound force, and if so, insert a thin wire into the gap and stir around to stir the foreign object trapped in the middle. >>>More

1 answers2024-08-31

Pry it up or pull it up with a tool. The return spring may have corroded and broken. Turn off the water valve and open the lid to see if it can be repaired. If it doesn't work, change it.

4 answers2024-08-31

If the water is opened, it will definitely cost water, so close the sluice gates, repair the toilet and open it again.

5 answers2024-08-31

First of all, it is necessary to determine the cause of the damage of the button, which is that there is a foreign object between the circlip sleeve and the button, which causes the main version of the button card to be damaged. Remove the lid of the water tank, check whether there is any foreign object in the gap between the circlip sleeve and the button, if there is no foreign object found in the gap on the surface, press the button with your fingers to feel whether there is a slight rebound force, if there is, then use a slender wire inserted into the gap between the four sides to stir up, so that the foreign object trapped in the middle can be stirred off. If there is no slight rebound, then the circlip is broken, in this case, you can only replace the circlip, look at the brand and model of the toilet, and go to the mall to buy the corresponding circlip replacement. >>>More

2 answers2024-08-31

Yes, as long as the water that flows through the water meter will be charged, your toilet is leaking, and the water source is also from the water meter, as long as there is a flow meter, it will incur a fee!