What to do with the toilet squatting pit dirty

Updated on Bathroom 2024-08-01
3 answers
  1. Anonymous users2024-01-24

    Go to the hardware store to buy a bottle of hydrochloric acid brushing, wear rubber gloves when washing, hydrochloric acid has a corrosive effect, and you can also use toilet cleaning to wash.

  2. Anonymous users2024-01-23

    Apply a high concentration of toilet cleaner evenly, brush after 10 minutes, and repeat if necessary until completely clean.

    Hydrochloric acid can also be used, so you should pay attention to safety and prevent splashing on clothing.

  3. Anonymous users2024-01-22

    This dirt can be cleaned up with a toilet cleaner, which is sold in most supermarkets that are very clean.

Related questions
2 answers2024-08-01

Just change the rubber connection sleeve that connects the water pipe to the squatting toilet in the squatting pit.

7 answers2024-08-01

1. Squatting pit blockage caused by paper towels.

Decomposable products such as paper scraps can easily cause clogging. Pour in boiling water to soften the blockage in the pipes. >>>More

1 answers2024-08-01

I think what you are talking about may be the angle valve, the angle valve may be broken, the valve core may fall off, you may drive the valve core when you screw, so it can enter the water, the top floor is pressurized to the water, the water pressure is unstable, it is easy to block the valve core, and the water can not be used, and when the reverse screwing may drive the valve core, and the water can be used.

1 answers2024-08-01

Pick it up and wash it or report the card as lost and get a new one.

3 answers2024-08-01

Hello, the most direct cleaning with 84 disinfectant, very pungent, wear a mask and close the door to prevent the smell from entering the house, open the window and open the ventilation fan!Just wash it up!Glad to answer for you!