-
Anonymous users2024-01-24Waxing is divided into open waxing and closed waxing. Open waxing is to expose the wood eyes and wood grain of the wood to the outside, and the wood of good materials and products with high technology level generally use open waxing to show the grade of handicrafts. Closed waxing is to fill the pores of the wood eyes to enhance the smoothness, generally using lacquer, because lacquer is environmentally friendly, non-toxic and tasteless.
When sealing waxing to fill pores, first use high temperature to bake the wax blocks and infiltrate the wood, then use an electric heater to infiltrate the wood, and finally use soft cotton cloth and cotton yarn to wipe off the excess wax. There are five major requirements for waxing: 1. Color:
The waxing is transparent, the wax film is very thin, the wood surface is not polished, but the waterproof is good, the wood is not easy to crack, and it plays a closed role, so the material selection requirements for the wood are higher, and the general color requirements are uniform. 2. Luster: waxing is not as bright as paint, because the brightness is determined by wax, and the product still has excellent gloss after careful polishing and polishing of wax, but general customers do not pursue this effect.
3. Smoothness: After careful polishing, the effect is determined by the thickness of the sand and the thoroughness of the polishing, the sandpaper is processed from 180 - 240 - 320 - 400 - 1000 from coarse to fine, and finally polished with a fine cotton ball to form a crystal clear luster effect and soft feel. 4. Fullness:
Available in both open and closed versions. 5. Clarity: Reveal the original wood grain.
It is also important to note that the baked wax must completely penetrate the wood, and the temperature of the heat gun must not be too high during the entire operation. The finished furniture should not be scalded and needs to be carefully protected.
-
Anonymous users2024-01-23Waxing will protect the furniture and make it look good in order to achieve the best decorative effect.
-
Anonymous users2024-01-22Yes, it is smoother and brighter after wiping.
It is more difficult to sand.
It can be scrubbed with alkyd thinner, but it is not very easy to get. >>>More
The paint is toxic, you can take a look at the paint barrel, like the varnish you brush is generally phenolic or alkyd varnish, and there are also white paints, you need to add a lot of thinner (xylene) to use on the wall, you have to decorate and ventilate more, and dry for more than a month.
You can use sand to polish the gold leaf to see if there is any shelling, and if there is a shelling, spray the primer once, and spray it after spraying the thin clear topcoat.
Golden silk nanmu furniture can be brushed with varnish, and the surface of nanmu generally does not need to check the oil to obtain brightness, because it itself is very smooth and bright, and wear-resistant, the more you use it, the brighter it is. Nanmu is a very precious wood, and there are many existing woods, furniture, decorations, jewelry, and so on in our country.
contains, formaldehyde. It's a must.