-
Cocking should be not flat when the brick is pasted, the collapse should be empty under the brick, both are bricks are not pasted, find a plasterer to knock the repaste, but to prepare a few more bricks, because to knock off a few more pieces to paste flat, I am a cabinet designer, I hope to help you-:
-
If you can't find a brick shopper, you can't change it.
Bathroom for a brick does not need to do waterproof, but you change the brick process will be difficult to avoid the destruction of the waterproof layer, you must be careful, you take off the brick, the following brick layer has been hard, if you want to paste a new brick must shave off the brick layer, at this time waterproof is very easy to destroy, it is recommended that you change the brick do not shave the brick layer that has solidified below, to the building materials market to see if there is that kind of thin adhesive brick glue, be sure to scrape the brick under the glue, to prevent water seepage from the periphery of the brick in the future. Finally, the bricks are caulked around and must be embedded.
There is a wall tile in the bathroom, which can also be rectified if it is warped. . . >>>More
If the glaze is a place where the brick is in the gap, it is caused by the thermal expansion and contraction of the wall, and the cracking is generally possible when the cement is too high when paving, or the wall sinks.
The color of this contrast is not very good at home.
The interior can be painted with waterproof paint.