How to remove the decoration gusset of the bathroom

I don't know what material you use to hang the roof, if it is a PVC board, there is no way to dismantle it, and the carpenter will fix it on it.

If the 30*30 integrated top is easy to do, you can use a small blade to insert it into the seam and stick it here, and pull it down hard, or use the transparent suction piece that sucks up to the wall and can also be removed.

Find the one that is most loaded and start there.

1. The dismantling method of the square aluminum gusset: when disassembling the square aluminum gusset in the bathroom, we can use a suction cup to stick to a corner of the aluminum gusset, and then pull the corner of the aluminum gusset to make it warp, and the other corners of the aluminum gusset are also in turn according to this method, and the aluminum gusset can be disassembled, and this method of disassembling the square aluminum gusset will not scratch the ceiling, and it is simpler.

Dismantling method of strip aluminum gusset: when we disassemble the strip aluminum gusset, we need to find the last piece of aluminum gusset installed, and then use a thin iron sheet to gently scratch the glass glue between the edge banding strip and the tile a few times, and then insert it into the gap of the edge banding, stroke back and forth, determine the position of the clip, and pry it downward. Finally, the aluminum gusset can be removed from the side in turn.

PVC board dismantling method: the bathroom PVC board is generally closed on both sides, we can use our hands to push the hanging board on the side of the ceiling, if it will be loose that piece is the last piece, and then push hard to the side, the PVC board is taken down, according to this method in turn, when we disassemble the PVC board, there may be screws fixed in the middle, we can use a screwdriver to remove the screws, and then remove the PVC board.