How to choose materials for the installation of toilet gussets?

Why is the flat top of the gusset of the bathroom uneven Because the gusset and the supporting frame are formed by metal sheet or plastic pressing and processing, the connection form of the gusset is inlaid type, in order to ensure that the connection is smooth and not loose, the size of the connection structure should be more accurate, the allowable adjustment range is small, and the installation requirements are higher. If the installation of the flat-top frame is uneven or the frame and gusset are deformed, hard insertion during the installation will cause the flattening of the roof to be uneven. In order to avoid the unevenness of the buckle leveling top, the following points should be paid attention to in the process of decoration construction:

(1) The purchased gusset and its supporting frame and accessories shall meet the product quality requirements and shall not be bent and deformed. (2) In the process of transportation and stacking, the gusset plate should be set flat and not pressed, and avoid the erosion of high temperature and harmful substances. (3) The frame is installed smoothly, and the spacing deviation should be controlled within the allowable range.

(4) When installing the gusset, if there is a deviation in the size, it should be adjusted first and then inserted in order, and should not be inserted hard to prevent deformation. (5) Large lamps, exhaust fans and other objects should be set up with another spreader, and should not be directly placed on the buckle flat top. As long as you can pay attention to the above five points, you can basically achieve the decorative effect of the flat top of the gusset and avoid unevenness.

In the construction process, if necessary, observation and inspection can be carried out by means of ruler and hand test. In addition, the state has a basic acceptance standard for the installation of the ceiling, that is, the variety, specification, color and base structure and fixing method of the materials used in the ceiling project should meet the requirements of the relevant specifications of the design; The cover panel and the keel should be tightly connected, the surface should be flat, there should be no pollution, cracking, missing edges and corners, hammer wounds and other defects, the seams should be uniform and consistent, and the pasted cover panel should not have delamination; The shelved cover panel shall not have leakage, penetration, and warping, and the keel that directly touches the wall or bathroom ceiling shall be coated with preservatives. You may wish to make an agreement with the renovation staff about this, and it is well documented in case of problems.

(1) The purchased gusset and its supporting frame and accessories shall meet the product quality requirements and shall not be bent and deformed.

(2) In the process of transportation and stacking, the gusset plate should be set flat and not pressed, and avoid the erosion of high temperature and harmful substances.

(3) The frame is installed smoothly, and the spacing deviation should be controlled within the allowable range.

(4) When installing the gusset, if there is a deviation in the size, it should be adjusted first and then inserted in order, and should not be inserted hard to prevent deformation.