When installing the drain of the kitchen sink, I don t know how many parts should be glued with glas

When installing the drain of the kitchen sink: 1. The place where the basin is connected should be made of glass glue; 2. The place where the basin is in contact with the countertop needs to be sealed with glass glue for sealing and waterproofing, and the middle part of the pipe has a special rubber pad connection, and if there is no leakage, there is no need to play glass glue; 3. The sewer pipe needs to be glued with glass. Turn the horizontal drainage pipe into a vertical one, add a short pipe to the elbow mouth, put the thin pipe in, plug something in the gap, and seal the mouth with glass glue.

Hello, kitchen sink drain pipe installation first step: install the drain filter basket. >>>More

Kitchen sink is indispensable for every family to decorate, but some of its installation steps are still unclear to many people, here is to introduce, first of all, when designing cabinets, the sink should be reserved, and the approximate size of the sink needs to be provided when ordering the countertop, so as not to meet the rework and redo. The sink should be installed at the end of the kitchen renovation, and the water in the water pipe should be drained before installation. First, install the sink faucet and the water inlet pipe, and the faucet should be installed firmly and the connection should not seep water; After placing the sink in the corresponding position in the countertop, the faucet inlet pipe, and the hot and cold water pipes can not be mistaken; The connection between the sewer pipe of the overflow hole and the filter basket and the tank body is firmly sealed; Install the matching hanging piece between the trough and the table to avoid the small gap causing the trough to shake; To do a drainage test, fill the sink with water, test the drainage of the filter basket and overflow hole, and find that the seepage should be reworked immediately; The edge sealing around the tank body is clamped and leveled with the matching hanging screws, and then the edge is sealed with silicone to ensure that the gap between the sink and the table top is uniform and there is no water seepage; Rinse the sink thoroughly after installation.

Now come to the kitchen sink sewer pipe varieties are annoying, the purpose of the pipe bending is to store water and prevent smell, also known as the water storage bay, your kitchen sink sewer pipe is too long, allowing for backwater, personal opinion, is also the easiest way is to paint the white PVC pipe color part of the mourning, the gray hose can be inserted.

Cut the drain pipe parallel to it with a hacksaw blade. Just leave 1 cm on the go. Then apply glass glue and smooth it with your hands dipped in water. Then go to the back of the water pipe. (The ground is kept dry) and it's done.