-
Anonymous users2024-01-23Cut the drain pipe parallel to it with a hacksaw blade. Just leave 1 cm on the go. Then apply glass glue and smooth it with your hands dipped in water. Then go to the back of the water pipe. (The ground is kept dry) and it's done.
-
Anonymous users2024-01-22Measure the pit spacing first, and buy a toilet according to the pit spacing.
It is best to have a U-bend to prevent odor when installing sewerage.
-
Anonymous users2024-01-21Measure the pit distance of 30 and 40 first, and buy a toilet according to the pit distance.
How to clean kitchen drain pipes? Kitchen sewer pipe cleaning, it is best to use a dredging machine is the most thorough. >>>More
The old pipes are sealed. Run the pipe alone. Direct access to the outfall.
If you talk about the plastic inlet valve inside, you need to remove it to clean it, observe it, and replace it if it is damaged. If it just doesn't slip fast, you can rinse it and reinstall it.
Don't do it, directly level the ground, moisture-proof film, and then go to the floor!
When installing the drain of the kitchen sink: 1. The place where the basin is connected should be made of glass glue; 2. The place where the basin is in contact with the countertop needs to be sealed with glass glue for sealing and waterproofing, and the middle part of the pipe has a special rubber pad connection, and if there is no leakage, there is no need to play glass glue; 3. The sewer pipe needs to be glued with glass. Turn the horizontal drainage pipe into a vertical one, add a short pipe to the elbow mouth, put the thin pipe in, plug something in the gap, and seal the mouth with glass glue.