-
Anonymous users2024-01-241. Tool raw materials: word change cone, T-20 spline. First of all, prepare the tools used in the whole process of disassembling the left front door handle of the Bora, a small word to change the cone and a T-20 spline, as shown in the picture below.
2. Open the left front door, there will be a small round hole on the side of the door, and there is a screw in it that fixes the lock cylinder of the door handle, what you need to do is to loosen this screw, as shown in the figure below.
3. Enter the key disassembly process of the door handle, both hands must exert force, and one hand should hold the door handle, as shown in the figure below.
4. Then take out the T-20 spline with the other hand, and loosen the screw again with the T-20 spline until the screw is loose and does not move, as shown in the figure below.
5. In this way, you can remove the door handle, hold the position of the handle with your hand, and then start from the side with the pull line, pull it out, and then take the front part out of the hole, so that the left front door handle of the Bora door is removed, as shown in the figure below.
-
Anonymous users2024-01-23How to disassemble the door handle in the car of the new Bora 2011 model:
Step 1: Disassemble the door trim panel.
Step 2: Pry open the decorative cover with the outer handle, pay attention not to hurt the paint, you can use a rag as a pad, and gently pry it with a small driver.
Step 3: Remove the outer handle. You can also go to the 4S shop to find a special master to help disassemble it.
-
Anonymous users2024-01-22It's very simple, pull the handle, break the cover, expose the screws, and know how to do it.
It can be replaced, and it can be replaced directly in the auto repair shop or auto parts city, and the accessories of the public are easy to buy.
The landlord, to remove the door handle, first have to remove the door guard, then remove the door protective film, tear the upper left corner, and then reach into the door cavity, remove the handle and the buckle of the door lock, and then remove the door handle screw from the side of the door, and finally, take off the door handle from the outside. Different models, the dismantling method is different, for reference only, if you really want to dismantle, it is best to find a professional 4S shop or maintenance personnel, because it is also divided into left and right front and rear doors, and the dismantling method is also different.
Remove all the screws on the interior panel, and there are many hidden ones, so it is recommended not to do it yourself, unless you have a strong hands-on ability.
Let's divide the case. If it is a new car, it is still in the warranty period, and sue the clan Tong and not socks Tan is artificially caused by Suiling, go to the 4S store to claim. If it is a second-hand car, it has been out of warranty, or it is artificially caused, you need to deal with it at your own expense. Such as satisfied!
Is there a problem with your handle? If there is a problem, it needs to be replaced.