-
Anonymous users2024-01-24There is a burning smell, it means that the plastic has a burning place, 1, the contact is not tight, it will ignite, it is necessary to check, sockets, switches and other plug parts. 2. Excessive power consumption and excessive wire load will increase the temperature, burn the rubber skin, and there will be a taste.
The landlord's house, if you turn on the switch and have a burnt smell, then you have to check the switch, if you have physical knowledge, you can do it yourself, remove the switch, there should be a problem, it is best to ask a professional electrician to check. Electricity is no joke.
-
Anonymous users2024-01-23Don't replace it yourself, ask someone from the property maintenance team to check the replacement.
-
Anonymous users2024-01-22Thoroughly inspect all wiring holes and sockets.
-
Anonymous users2024-01-21Is it a ceiling light? You see there's a problem with the terminal and the ballast.
You can soak it in vinegar or lemon with water, then blow dry, and put some clean orange peel or flower tree when using.
When the living room light is not turned on, the bedroom light is normal. When I turn it on, the bedroom light keeps flashing, what is the reason? How to solve it? >>>More
It should be caused by poor contact, for safety, it is best to ask a special electrician to check the circuit, so as not to cause local short circuit or other safety hazards. In my house, the bedside lamp used to be that the living room door would only come on if you closed it hard.
You need to know that air conditioners may not share the same circuit as lighting outlets. >>>More
You use a sectional switch, which has 2-stage, 3-stage, 4-stage, with and without remote control. According to your description, the segment switch should be broken, and you can replace it with a switch with the same number of segments. The segment switch is inside the lamp.