Bathroom What materials can be used for waterproofing in the kitchen? How much does it cost?

First of all, the ground leveling, and then on the basis of leveling brush waterproof mortar, note, the position of the shower should be brushed high, the pipe transformation is best from the wall, do not go to the ground, polypropylene cloth is generally not suitable for the family bathroom used in the project, generally a set of waterproof mortar 200 or so quickly to get it, there is no need to ask the waterproof company, the bricklayer did it, and the water avoidance test is done after completion.

Now the kitchen and bathroom are prefabricated The focus of general leakage is the drain and the surroundings, all of which are waterproof, do not damage the waterproof layer, if you want to re-waterproof, you can buy a plug to re-deal with the leakage, keep it without leakage, and it is much better than waterproof materials.

At present, the use of polyurethane, polypropylene and other film-forming materials to achieve waterproofing in home decoration has been gradually eliminated. The reason is that they are waterproof through film formation, which will be easily damaged and leak during construction, and what is more worrying is that its environmental protection is too poor and the pollution is large.

Now mortar waterproofing agent is commonly used in home decoration. The waterproof treasure mentioned upstairs belongs to this category.

The brands of mortar waterproofing agents that are often used in home decoration and have good quality are: JCDecaux, Jinsheng, and Laoyal. They are colorless and odorless.

The kitchen and bathroom are relatively stable parts of the house structure, so the waterproof requirements will be lower than the balcony and roof. Bathrooms and kitchens are small in size and have many pipes, so it is not easy to cut and paste if the membrane is used, and there will be a pungent smell, which is not very environmentally friendly for indoor use. Therefore, it is recommended to use mortar waterproofing agent, which is not only firm in adhesion with the base surface but also puncture-resistant, high strength, waterproof life can be the same life as the building, construction is also simple and convenient, and cost-effective, so it is the most widely used material now.

As for the price, it is lower than waterproofing membranes and waterproof coatings.

Due to the small area and many nozzles in the bathroom and kitchen, it is not suitable to use membrane waterproofing, because there are many interfaces of membrane waterproof materials, and there is a hidden danger of water leakage if it is not handled well. The correct approach should be to make a layer of waterproof mortar and then make a layer of paint on top of it waterproof, the coating can choose polyurethane waterproof coating or water-based polymer waterproof coating or other waterproof coatings.