The sink of the toilet is always filled with water

If the toilet is always on the water, maybe it is a problem with the water tank, you can check whether the material or parts of the water tank will be too old, because some small parts are relatively unused, and it will not take long for the phenomenon of damage, if it is used for a long time, there will be problems, then it is a phenomenon of natural wear and tear, as long as it is replaced, the phenomenon of leakage on the toilet does not stop and cannot be eliminated, it may be because of the sewer pipe, because the function of the sewer pipe is used to connect the toilet tank, It is also possible for a major conveyor pipe to have this problem.

It may be that you did not express it well, did not explain it in detail, and it is not the sink It is the inlet valve in the water tank The inlet valve is responsible for the water supply and water stop of the water tank Automatic water supply and automatic water stop If it is always water non-stop, then you have to consider whether the water inlet valve is broken, of course, you have to make sure that the water inlet valve floating bucket will not be stuck by something else, or interfere with, if something is stuck in the floating bucket, it will also cause the water inlet valve to not only water.

If nothing interferes with it, then you can only change the inlet valve.

We are a professional toilet tank parts repair and replacement shop, the owner has more than 10 years of professional experience to match you with the best and most suitable toilet water parts

Hello The toilet has been on the water and can't stop Solution: 1When you find that the water on the toilet bowl does not stop, you should first check the cause and then take measures to deal with it.

2.If it is caused by the water tank, check whether the accessories in the water tank are aging or damaged, and then replace them with new ones. 3.

Because there is a problem with the sewer pipe, it should be replaced with a new one. 4.If the problem is very serious, it is recommended to ask a professional maintenance person to come to repair it.

I hope the above can help you, and I wish you a happy life.

The automatic water supply valve is not well sealed, repair or replace it with a new one.

The inlet valve is broken, please replace it with a matching inlet valve.

The sealing interface is not connected properly, and it is recommended to replace it with a new one.

Check them one by one to see if the parts of the tank are in good condition.

You can check the material of the water tank, or whether the parts are too old, there are many types of toilets on the market now. But none of us can guarantee that some small manufacturers or unscrupulous merchants will produce some inferior toilets, so we can't judge its quality from its appearance. Therefore, it is necessary to check from the inside, to check its internal parts, because some small parts are relatively unused, and it will not take long to be damaged.

A toilet, also called a toilet, is a bucket with a lid for urinating and urinating. The invention of the toilet is known as a great invention, which solved the problem of people eating and drinking in and out of Lazar. Later, it gradually evolved into a flush toilet using the principles of siphon, spiral siphon, and now the latest jet siphon and super-siphon type.

There are also people who believe that the flush toilet is the root of all evil because it consumes a lot of domestic water. There are many classifications of toilets, including split and conjoined. With the development of science and technology, many novel varieties have also appeared.

There are generally five reasons for the failure of the toilet bowl to run for a long time:

1. Overflow and long flowing water; If the water level is adjusted too high, lower the water level below the overflow pipe.

2. The water feeder is not tightly closed, resulting in an increase in water level; Replace the water-stopping leather pad or remove the hard objects between the leather pads to ensure that the seal is tight.

3. The rubber plug of the sewer is not tightly sealed; Remove the foreign matter between the plug and the set screw, and replace the aging rubber stopper.

4. The screw of the drainer is loose; Tighten or replace.

5. The float rod of the water feeder is broken, the float is out of control, and the float is stuck at a low water level, resulting in high water level and long flowing water; Commissioning or replacement.

Can you elaborate on that?

I'll see if I can help you out.

The automatic water supply valve is not well sealed, repair or replace it with a new one. **

Check out the essence post of the tide house, and I will already give you the answer. --