What s the matter with the slow flushing of the toilet?

Low water pressure, clogged inlet valves, inlet pipes that are too thin or bent, and problems with toilet fixtures.

1. Low water pressure.

This problem in many families has nothing to do with the toilet, it is caused by low water pressure, and it is relatively difficult to solve this problem, especially for high-rise households, if there is no secondary water supply, the water pressure will definitely be extremely low.

2. The water inlet valve is blocked.

You can check the toilet inlet valve first to see if it has not been completely opened, and the inlet valve is opened to the maximum. It is also possible that there is a nylon net for filtration in the inlet valve to ensure that no debris enters the toilet tank. It will inevitably be clogged after a long period of use, so it is good to be able to take it apart and take a look at it, and clean up the clogged debris.

3. The inlet pipe is too thin or bent.

The thickness of the water inlet pipe also directly affects the amount of water intake, and the water inlet pipe of the normal toilet is made of four points of pipe diameter, so as to ensure the normal toilet water supply. If the inlet pipe is too thin, it can only be replaced. If the water inlet into your toilet is normal at first, it may be that the water inlet pipe has been used for a long time and is bent.

4. There is a problem with the toilet water parts.

There will be a float for water inlet and water stop in the toilet tank, so when the water inlet valve is fully open, press the float with your hand to see if it can still enter and stop water normally. If not, then there is a problem with the water and it is necessary to replace it.

Slow entry may be blocked! When the toilet drains poorly, there may be some slight blockage, and some treatment is needed to avoid causing a more serious blockage. Here are a few ways to unclog your toilet.

At present, public toilets generally use inductive toilet water savers, which are intelligently controlled for flushing and water saving; At present, the toilet in the family bathroom is generally siphon type, using the principle of U-shaped pipe flushing. What to do when your toilet doesn't drain well or won't flush at all? Toilet toilet drains are not draining well, and there may be some slight blockage, which needs to be treated to avoid further serious blockage.

1. If it is convenient, you can go to the technician or property for help.

2. Solve it by yourself, try it with a mop at home a few times, mainly because you need a large water pressure to wash down the waste stored in the pipeline.

3. Use a hand-cranked dredge (like a long spring, local products are sold) to dredge, rubber, pay attention to skills, and push down and violently! 4. With professional tools, connect one end of the soft rubber pipe to the faucet and the other end to the drain, and plug the cloth and seal it tightly. Turn on the faucet slowly and use the water pressure to flush the dirt out.

5. Go to the supermarket to buy some pipeline chemical dredging agents, use them according to the instructions, do not use hot water, it is easy to splash burns, and strong alkali is corrosive.

There is less water coming out of the faucet.

The first trick, most of the toilet water problems are related to the faucet, the toilet faucet water output is less will naturally lead to slow water supply, there is a filter screen in the toilet water replenisher, after a long time of use, the filter will accumulate a lot of dirt, so that the water flow will be affected, you can take it down directly for cleaning. First of all, disassemble the water inlet pipe, see if the filter screen of the water inlet component of the water tank is blocked by impurities, if it is blocked, it is simple, take it out and clean it. If not, there is a valve in the tank to check the water, and the water in the tank can be quickly drained by re-spraying.

Lift the lid of the water tank.

The second trick is to see if the water pressure is low, if the water pressure is not low, then see if the water valve under the toilet is open to the maximum. If the pressure is low or the bearing is broken, lift the water tank cover and adjust the water pressure knob. You can use the hose directly to the bottom of the toilet, the toilet water filler is connected with the plastic pipe, the nut of the toilet is generally plastic, it is very good to disassemble and then replace the water filler can also quickly solve the problem, you must know that the water filler will directly affect the toilet water speed, the water filler is also very easy to buy on the market, and the matching is also very simple.

The third trick of cleaning, see if the water inlet hose is bent, if the bending is too large, there will be a slow water inlet, the cleaning of the toilet pipe can also improve the toilet water speed, when cleaning, you can directly inject some decontamination ability of the detergent, so that with the flow of water can be cleaned the toilet water pipe, no scale, of course, the water speed will be faster, and the regular better water pipe can also solve the problem, the cost is not high.

What's going on with the slow flushing of the toilet, life tips, come and learn it.

No, there are two reasons for the slow filling of the toilet 1, the pipe is blocked, check whether the pressure of the toilet inlet is large, whether the water inlet is strainer, and whether the filter is blocked. 2. Check if there is a problem with the water pressure and whether the water pressure is too small.

1. Insufficient water pressure: compare the pressure and speed of the shower and faucet.

2. Water pipe blockage: It may be that the water pipe is blocked, resulting in slow water supply.

3. Check whether the main switch of the water pipe is not adjusted properly.