-
Anonymous users2024-01-24There is a wrench for the hexagonal inner screw, which is available in any place where the faucet is dealership, so it's good to borrow it.
-
Anonymous users2024-01-23You're screwing it upside down, it should be counterclockwise.
-
Anonymous users2024-01-22Go find a car repairer and get a hexagonal sleeve there, and it's not a difficult task.
Remove it and take a look, generally the outlet pipe is threaded in.
Hello? It's a pipe. Each house is connected from the water meter to the home by a pipe, and then divided into bathrooms, kitchens and other places.
Water quality and water pressure are exactly the same, they are two pipes separated from one main pipe, both from the main pipe.
Shower hot and cold water faucet valve core is generally first take off the handle, the handle is generally removed from a red and blue plastic cover to take away, the screw can be removed, some are hexagon and some are slotted screws, and then, the decorative cover that presses the valve core is unscrewed, this is generally more labor-saving, and then use a big wrench to unscrew the metal nut that presses the valve core, you can take out the valve core
The part of 3 in the figure is a screw rod downwards to put a rubber ring (to play a sealing role to prevent downward leakage), and then through the basin, there is a nylon lock nut from below to tighten, play a fixed role! You first check if the rubber ring doesn't work, and then check if there is a dew point in the screw part (some brand faucets are made of recycled materials, and the service life will not be very long)!