-
Anonymous users2024-01-24Add a wind deflector 30 cm outside your window, and the size of the board is determined according to the lighting surface of the window. Plexiglass panels can be used for easy lighting.
-
Anonymous users2024-01-23Talk to a neighbor about sending him a different direction.
-
Anonymous users2024-01-22Ask him to lengthen the tube and fix it to the side.
-
Anonymous users2024-01-21Go tell the neighbor and let him get it.
There is no good way to do this, either let the smoke machine pipe next door blow upwards, or usually close the window, or you also install an exhaust fan on the window, and you turn on the hood opposite you will turn on the exhaust fan.
This is often said to be fume backfilling, if the flue mouth on the wall is not installed with a fume valve, please install one, pay attention not to lose the big because of the small, try to pick the best, the fume backflow is not serious can generally be solved. If the fume backflow is very serious, or the fume valve has been installed at the flue mouth, you can only install an electric fume valve at the air outlet of the hood, of course, you can also install the electric fume valve directly in one step.
If you live in a building with a public flue, it is not uncommon for you to pour smoke and smoke from time to time, especially during the peak period of stir-frying. >>>More
It is recommended that you go to the neighbor's house to communicate, let him bend the smoke outlet down 90 degrees, so that there is no impact on the smoke in his house, and your home will not be polluted by oil smoke, the best of both worlds, please adopt it.
Discuss a peaceful settlement with your neighbors, after all, your neighbors will look down and not look up.