-
Anonymous users2024-01-24Hello, such a situation is rare, but you can consider asking the master to use a motor to knock off the wall or floor, so that it can be removed, if the ground is too thin to knock off, then it is really troublesome! This is just a suggestion, not the right way to do it! Please forgive me!
An interior designer's answer for you, I hope it can help you, if you agree with my answer, remember to adopt a satisfactory answer for me in time! Your recognition is my biggest motivation! Thank you!
-
Anonymous users2024-01-23Can you briefly describe how you use asphalt to make waterproofing? Is it PVC paste hot melt coating, finished asphalt coating, or modified asphalt waterproofing coating?
-
Anonymous users2024-01-22It can be washed off with gasoline, and if it is much thicker, it can be baked hot, and then it can be washed with gasoline or diesel if it can't be shoveled.
-
Anonymous users2024-01-21Asphalt can also be used for waterproofing, which does not have to be shoveled; It doesn't hurt that other waterproofing coatings can continue to be covered. After it is thoroughly dried, the surface can continue to be painted with other paints or tiles, etc., and it will be completely closed and will not smell.
-
Anonymous users2024-01-20Heat the blade, shovel off most of it, and wipe the rest out with a rag dipped in gasoline or kerosene.
-
Anonymous users2024-01-19Continue to cover better, tasteless.
What kind of waterproof material do you use, Guoerjia acrylic home decoration kitchen and bathroom waterproof material, the effect is good, and it will not be like you, you can take a look at this paint.
Pour "Tianna Water" (also known as "Banana Water", available in chemical stores) on the asphalt (2 times in 10 minutes) to make it soft and softened, and then use a scraper (pretending to be a small tool for repairing the noise) to remove the asphalt. If the asphalt is stuck to the floor tiles, it is easier to remove the slack. >>>More
Congratulations! There's a connector underneath! After you pull it out! I just fell into the water. I'm deeply touched! Just like you!
When encountering such a problem, one is to ask the dredge workers to help. You can also make it yourself 1, choose a wire that is not too thick 2, bend a hook at the front end 3, slowly stretch into the bathroom sewer 4, try to hook out Don't be in a hurry when hooking, be patient, and don't hook several times at a time.
If you don't want to replace it, apply it with marble crystalline paste.