Is it enough to make a waterproof bathroom wall?

The biggest advantage of this kind of toilet is that as long as the waterproof layer of the lowest layer is not destroyed (the general developer has already done it, and there is no need to do it again), the waterproofing of the ground has little to do with it. There is also the best way, which is to prevent the ground from sinking, the specific method is: use bricks to build walls in the sinking space to separate the support, and fill the ceramsite in the middle of the lattice brick wall, because there are bricks supporting the ground, the ground will not sink, and then do the waterproofing of the ground can really play a role.

Bathroom waterproofing, whether it is the waterproof paint or mortar waterproofing agent used, after the first time of painting, as long as you wait until it is not sticky to the touch, you can start to paint the second time, and you don't need to wait for the first time to completely dry before painting the second time. >>>More

If the wall is not sprinkled with water before waterproofing, the common manifestations are the following two: >>>More

The wall should be waterproof, the shower wall should be metered, and the other walls should be metered. If it is not done, it is necessary to ensure that the joints of the wall tiles can not seep water, and the wall tiles cannot accumulate water, and drain water quickly.

No. The bathroom is not only waterproofed on the ground, but also needs to be painted with waterproof paint on the wall, and the height of the general wall waterproof coating is not less than 30 cm; If there is a shower, the height of the painting should not be less than 150 cm on the wall adjacent to the shower faucet and this faucet; The floor and wall should be painted at the same time without interruption. Tiles have a certain ability to "water resist", but it is difficult to ensure that the gaps in the tiles do not enter water. >>>More