The decoration is waterproof, and the wall of the bathroom is not done, because I heard that the wal

No. The bathroom is not only waterproofed on the ground, but also needs to be painted with waterproof paint on the wall, and the height of the general wall waterproof coating is not less than 30 cm; If there is a shower, the height of the painting should not be less than 150 cm on the wall adjacent to the shower faucet and this faucet; The floor and wall should be painted at the same time without interruption. Tiles have a certain ability to "water resist", but it is difficult to ensure that the gaps in the tiles do not enter water.

Many problems of mold, peeling, and peeling of latex paint on the back of the bathroom wall are due to the fact that the wall in the bathroom is not waterproofed - you can't save this money.

Hello. It is not possible to brush the wall with waterproof paint - unless you don't want to paste the tiles, otherwise the tiles will definitely fall off, and the water is not leaky to plug local holes, not suitable for wall painting, it can not be bonded to cement.

Water leakage can only be used as waterproof accessories, and it is best not to brush, because the best water mixing ratio is 1 ratio. If the amount of water added is too large, the water will not leak and the amount of water will be too large during the hydration reaction, which will affect its performance. It is recommended that you plug the lower nozzle with water and then brush K11 waterproof paint.

It depends on where your bathroom is, the current commercial housing is generally next to the bedroom, that is to say, it shares a wall with the bedroom, such a bathroom must be done twice, and it must be topped, because you have steam in the shower or something It will affect the wall paint of the bedroom for a long time.

The wall is not a big problem, the key to waterproofing is to do a good job in the waterproof treatment near the floor drain and sewer pipe, waterproofing this item if you want to prevent the bathroom from thinking of a large water tank, the water will eventually flow to a low place, for example, the position of the bathroom door is impossible to roll up the waterproof cloth, so eventually the water will soak into other rooms from this place and then regurgitate under the waterproof layer of the bathroom, so as to cause the illusion of leakage of the waterproof layer of the bathroom, In the final analysis, the wall and floor tiles of the bathroom must be made of waterproof material wall and floor tiles, and the brick joints must be filled in well when tiling, so as not to let too much excess water soak into the waterproof layer under the floor tiles, so that the waterproof problem of your bathroom is safe, I hope you can adopt my answer

If you don't know how to sprinkle water on the wall, you can't do it. If the sprinkling is not waterproof, at least the tiles and cement layer will have moisture, and your home will be damp.

I don't know much about that, but it is recommended that you directly apply a layer of CPC leak-proof agent, which I can guarantee that it works, if it is a floor leakage, it can also be directly applied between tiles and tiles, CPC leak-proof agent is imported from Australia, green and environmentally friendly, you can consider it yourself.

It is very convenient to do waterproofing by yourself, and Taobao searches Bangming waterproofing agent. Apply it directly to the wall.