What is the distance between the water heater ceiling and the hanging plate?

Updated on Suspended ceilings 2024-08-26
2 answers
  1. Anonymous users2024-01-24

    The gap is reserved for future maintenance and disassembly, and the range hood is the same, push it up and take it off.

  2. Anonymous users2024-01-23

    nononono...Leave a little distance to facilitate the disassembly and assembly of the drops.

Related questions
4 answers2024-08-26

It doesn't matter if it's close to the ceiling.

Generally speaking, the vast majority of storage electric water heaters have a gap of about 5cm from the ceiling after the installation is completed. >>>More

1 answers2024-08-26

It depends on the height of your ceiling, and the horizontal electric water heater is up to the size of the radius of the electric water heater plus 10cm as a reference value, which is convenient for hanging and unloading.

6 answers2024-08-26

Is the pipe laid openly or covertly?

If it is laid openly, there is a way to solve it, and the dark laying can only waste water, let the cold water out, until there is hot water coming out. >>>More

3 answers2024-08-26

The pressure of the tap water in your house is not enough, and the water is no pressure when the floor is high, and there is a water flow pressure detection switch in the water heater. If the pressure is too low or the water flow is too small, it will automatically shut down the liquefied gas. This is a safety switch to prevent the water heater from drying out.

1 answers2024-08-26

There is no such indicator, but from the perspective of heat loss, the shorter the hot water line, the better. >>>More