How to choose solid wood flooring?

1. Selection of tree species.

There are many tree species of solid wood flooring, including imported and some domestic, more precious teak, pear, etc., relatively general is maple, oak, ash, gamba bean, and fir, pine, etc. are relatively cheap, different tree species material and price vary greatly, so when choosing wood flooring, you should ask which tree species it is.

2. Determination of specifications and dimensions.

The specifications of solid wood flooring on the general market are: the length is about 450-910mm, the width is about 90-125mm, and the standard thickness is generally about 18mm. In terms of wood stability, the smaller the size of the floor, the better the deformation resistance, so we should try to choose a shorter, narrower solid wood floor, which has a relatively small amount of deformation, which can reduce the phenomenon of bending, twisting, scooping, cracking, shrinking, arching and other phenomena of solid wood flooring.

If it is floor heating, it should be thin and not thick when choosing a wooden floor, about 8-12mm.

3. What is moisture content?

The moisture content will affect the deformation and cracking of the floor, so the moisture content of the purchased floor must be consistent with the local equilibrium moisture content. Generally, the moisture content of the floor is 7%-12%, and the maximum is not more than 14%, so you must pay attention to this when purchasing.

4. Machining accuracy.

Assemble several floors on the flat ground, touch them with your hands, and see whether the processing quality and accuracy, the finish is smooth and smooth, whether the installation gap is qualified, and whether the anti-deformation groove assembly is tight and tight.

5. Substrate quality.

Check the quality of the floor to see if there are any defects in the board such as insect eyes, cracks, decay, dead knots, etc. There is no need to be too strict about small joints and color differences, which are the natural properties of wood, and it is the color difference and the natural texture that are rich in changes that show the natural color of solid wood flooring. As for the natural grain of wood, most of them are chord sections, and a small number are radial sections, which are difficult to achieve in solid wood floors if they are to be the same as all faces, unless they are planed veneers.

6. Paint quality.

When purchasing wooden flooring, we should pay attention to the quality of the paint on its surface, and ensure that it is uniform, smooth and smooth, and there can be no problems such as paint leakage, bubbles and cracks.

7. Skirting board and pressing strip.

In general, one square meter of floor requires at least one meter of skirting boards, so the price and quality of skirting boards must also be concerned. The baseboard is generally made of fir or pine wood, and the height is generally 7-10cm.

1. Floor specifications.

In terms of the stability of the plank, the smaller the size of the floor, the better the resistance to deformation, so it is necessary to choose a shorter, narrower solid wood floor, and minimize the bending, twisting, scooping, shrinking, arching and other phenomena of the solid wood floor. Flooring experts believe that the short one is better than the long one; The narrow one is better than the wide, and it is cheap. But now the market is popular wide plate, the wide plate is more beautiful than the narrow plate, generous, the texture is relaxed, the pattern is complete, but the qualified wide plate must go through strict material selection and quality acceptance.

In general, wide floors should have deformation-resistant grooves on the back, and the grooves should be up to one-third of the thickness of the floor. If it is used for floor heating, it should be thin but not thick, generally 8-12mm thick.

2. Floor moisture content.

The moisture content of wooden floors is crucial. The moisture content of the purchased flooring must be equal to the local equilibrium moisture content. When buying a floor, be sure to measure the moisture content, if you don't have a moisture content tester, don't buy its board.

The method of balancing the moisture content determination is very simple, first determine the moisture content of the purchased varieties in the exhibition hall, and then open the box to detect the moisture content of the purchased varieties of wood flooring, if the moisture content of the two is only +1%-2%, it is a qualified product.

3. Floor material.

Observe with your eyes whether the floor is of the same material, and whether the board surface has material defects such as cracking, decay, peeling, dead joints, insect eyes, and blue staining. Usually there is no need to be too strict about color differences, joints, textures, etc., which are the natural properties of wood. It is the color difference and the natural texture that changes that show the natural color of the solid wood floor, which is the fashion pursued by the current international home decoration.

4. Machining accuracy.

Generally, after unpacking the wooden floor, you can take out about 10 pieces of freehand assembly, touch it by hand, see whether its processing quality accuracy, finish, whether it is smooth and smooth, and whether the tenon and groove fit, installation gap, denaturation resistance groove and other assemblies are tightly fitted. Observe the tongue and groove occlusion, assembly gap, and height difference between adjacent plates.

5. Floor after-sales.

There are many wood flooring manufacturers on the market, the quality is uneven, it is recommended to choose a good brand of wood flooring, these brand manufacturers will provide perfect after-sales service, and there is a certain warranty period. It can save a lot of worry.

Take a look at the appearance. Usually, before the floor is used, you can feel the smoothness of the board surface and paint surface of the floor from the appearance; Observe whether there are enough bubbles or paint leakage on the surface to judge. If you find that the surface of the floor is dark and the paint layer is thick, it may be done to cover up the defects of the floor surface; When the floor is a six-sided seal, the paint is more noticeable.

Second, look at the material. There are countless hardwood floors on the market, and there are many tree species used in hardwood flooring. Many unscrupulous merchants in order to promote and reduce costs, the wood is named with a variety of unknown materials, such as jade sandalwood, gold does not change, etc., at this time it is necessary to pay attention, to carefully inquire, identify what kind of wood it is, do not buy it home only to find out that you are deceived, and it is troublesome to replace it when the time comes.

3. Check whether the template is defective. Real hardwood floors are natural panels, with slight color differences, and the uneven pattern is understandable. However, if the floor is cracked, rotten or mildewed, it means that the board is not good.

Fourth, look at the parameters. The moisture content of the floor is different in different regions, and the national standard moisture content is generally about 8% to 13%. Therefore, at the time of purchase, it can be detected on the spot; The error of 2% is considered to be within the normal range and is acceptable.

At present, most of the solid wood flooring on the market is 900mm*90*18mm, and there are other wider or narrower specifications. In terms of the stability of the wood, the smaller the size of the floor, the stronger the resistance to deformation. Wood density is also a concern, the higher the wood density, the stronger the floor.

For example, in areas that are frequently frequented such as the living room, dining room, and bedroom, it is better to choose a high-strength floor.

Fifth, look at the brand reputation. Reputable brand merchants, pre-sale, sale, after-sales service are relatively good, and the environmental performance of the plate is also more guaranteed. How to choose solid wood flooring?

When choosing solid wood flooring, consumers can take a look at what type of solid wood flooring they need, and then see what kind of purchasing skills they have. So as to give yourself a better choice.

Compared with other floors, solid wood flooring is environmentally friendly and durable, and is the first choice for many home decorations. So how should you choose solid wood flooring? These programs cannot be saved during the purchase process!

1. Merchants should be required to provide necessary green and environmental protection test reports. 2. Look for businesses with high consumer evaluation and guaranteed after-sales. 3. But it is not good to look at a product, for the same kind of board, different brands of solid wood flooring, I carefully compare the production process, price and industry professionalism and other issues.

4. The contract and invoice must be marked with: wood species, board specifications, size, quantity, price, etc. 5. On the sales contract of solid wood flooring, write the formal scientific name of the purchased solid wood floor to prevent merchants from deception.

6. Before the floor is paved, carefully inspect the wood species, specifications, quantity and size of the purchased solid wood floor. 7. Remember, solid wood flooring is generally included in paving, so remember not to spend this unjust installation cost. That's all, the current good solid wood flooring brands are nature, icons, life homes, etc., it is recommended that you choose the right wood flooring according to the decoration style and preferences of your home.

There are many colleagues around me who use amber flooring, mainly solid wood flooring, with many varieties, good color, more durable, and easy to take care of.

How to choose wood flooring for decoration? Wooden flooring is an indispensable part of modern home decoration. However, after the house is renovated, many owners find that the color of the wooden floor is not as good as expected. In fact, this is all the reason why the color was not chosen well.

How to choose solid wood flooring? 1. At present, the name of the tree species on the market is confused, and the growth environment of the wood is different, because the material of the same tree species is slightly different due to the origin, and the price of raw materials is not the same, but the material is not imported than the main material of the country, China's tree species are numerous, rich in resources, and the tree species in many areas are good, and the price is lower than the same imported materials. In order to promote sales, some manufacturers have given the wood a variety of names that do not conform to wood science, such as rosewood, gold and sandalwood, jade sandalwood, etc.; What's more, with low-grade high-grade wood, consumers must not be confused by the name, figure out the material, so as not to be deceived.

2. When buying solid wood flooring, it is good to buy from enterprises with good brand reputation and high reputation, in addition to quality assurance, there is usually a certain warranty period for the product, where warping, deformation, dry cracking and other problems occur during the warranty period, the manufacturer is responsible for repairing and replacement, which can avoid consumers' worries. Solid wood flooring is not as long and wide as possible, it is recommended to choose a short and medium length floor, which is not easy to deform; Wooden floors that are too long and wide are relatively easy to deform. That's it, I hope it helps.