How to maintain solid wood flooring?

Maintenance of hardwood floors.

The maintenance of solid wood flooring is often estimated or said to be too difficult. It's not that hard. For ordinary cleaning, just use a vacuum cleaner.

But remember that the wheels of the vacuum cleaner should be fitted with a soft sleeve to avoid damage to the floor when moving. In addition, you can use a special mop handle with liquid wax once a month. It should be noted here that it is a liquid wax, not a solid wax.

If you use it frequently, you can change the waxing cycle to half a month, and the best waxing time is before your last wax is completely worn out. After the first laying, the liquid wax can be applied once before construction.

Unless your flooring is already very worn, don't use solid wax. Generally, solid wax is suitable for solid wood floors for more than five years, but it is enough to hit once, and liquid wax is usually used. For specific operation methods, please refer to the relevant product manual.

Wooden floors should be avoided during the process, and it is best to have several pairs of soft-soled slippers at the door so that family and guests can change when entering.

During the use of wooden floors, attention should be paid to the safety of water and the dumping of water behaviors such as teacups should be avoided. If you accidentally pour a small amount on the wooden floor, don't panic too much, you should use a dry cloth or paper towel to absorb the poured water in time, and then use a cool fan to dry. The general solid wood floor has a six-sided sealing paint treatment, and a small amount of water will not cause too much trouble.

However, it should be dried in time to avoid mildew and blackening.

I was also buying flooring during this time, and I was in the process of choosing, and I learned a lot about flooring.

Pay attention to moisture, don't be too dry, and then pay attention to maintenance, don't use too inferior oil, it's best to dip the oilseed on the cloth when using oil, and then wipe the floor, because the floor will creak if there is too much oil.

If there is anything else, let's add it later.

Don't use oleacean, wax and mop with a wet mop.

Wooden flooring is used and maintained normally.

1.Ordinary wooden flooring should not be laid in the kitchen and bathroom. For laying, it is recommended to use the sauna floor.

2.In order to ensure the quality stability of the floor after installation, personnel can only enter and walk around after 12 hours after the floor is installed, and heavy objects can be moved in at least 48 hours later.

3.In the area where the floor is laid, the furniture with large volume and weight should not be placed symmetrically, so as not to affect the free expansion and contraction of the floor.

4.When handling furniture, it is not advisable to drag and drag hard, and it is not advisable to use iron furniture feet to directly touch the surface of the wooden floor.

5.After the floor is laid, the house should not be uninhabited for a long time, and the indoor air circulation should be maintained frequently. In order to avoid excessive dryness or lack of ventilation in the room, it will cause the phenomenon of assembly and cracking, or due to excessive humidity, arching phenomenon.

6.When going out, keep doors and windows closed to prevent rain from getting wet. If water is accidentally poured on the floor, it should be wiped clean in time.

7.The paved floor should be exposed to direct sunlight as much as possible to avoid excessive ultraviolet radiation, resulting in cracking and aging of the floor surface.

8.It is recommended to place a rubbing mat at the door to reduce the wear and tear of the floor from sand and soil.

9.When cleaning the floor, use a vacuum cleaner or wring out a slightly damp rag to mop in the direction of the floor, and never rinse with water.

10.The method of removing floor stains should be correct, and the floor should not be scraped with hard objects such as iron. For special pollution, please wipe it with a soft neutral detergent and wet water, and do not clean the floor with steel wool balls or corrosive solvents such as alkaline water, gasoline, and flammable materials to avoid damaging the board surface.

11.In order to protect the paint surface and make the floor as beautiful as new, it is recommended to apply a special oil essence for flooring every once in a while (about 2-3 months).

When the floor is new, the heart is high, and I think about maintenance. However, it is only two or three times. Just stop it.

So, even if the customer wants to know, I don't talk about it very much. To put it simply, there is no need to study too much, tired.

So, I'll just tell you: waxing is when you think of mopping the floor, holding a "waxed cloth" in your hand, and nothing else.

Let's use the swallow peat to carbonize the floor, basically no maintenance.

Introduction from 8035 Wood Industry Network:

1. Anti-fouling.

Every two or three months, you can apply floor wax to the floor. Before waxing, dust and dirt should be removed, and then a clean, lint-free soft rag dipped in wax, starting from one edge of the wooden floor, should be wiped in a ring on the board in turn. After wiping evenly, use the original rag (no longer dipped in wax) to wipe from the edge of the original wipe, and wipe it again in turn according to the above plan.

The waxed floor not only cleans and refreshes, but also protects the paint film and delays aging.

When maintaining the solid wood floor, we must pay attention to keeping the floor dry and clean, and do not wet it with water or scrub it with alkaline water or soapy water, so as not to damage the brightness of the paint. If it is dirty or dirty, it can be wiped with a dry cloth. It is also necessary to wax once a month, but wipe off moisture and stains before waxing.

2. Varnishing. Use.

After three or five years, the floor can be repainted with the same kind of paint as the original painted floor. In addition to dust and dirt removal before painting, a fine water sandpaper should be applied, dipped in warm water, and the board surface should be gently sanded to remove the remaining oil stains on it, and to grind off the small paint particles left in the last paint. After sanding, wipe it clean with a clean rag and you can apply the paint.

In this way, the painted floor will be smoother, cleaner and shinier.

3. Heat-proof. If there is a heating leak or water on the wooden floor, it must be wiped clean in time, and it cannot be directly exposed to sunlight or baked with an electric stove, so as to avoid drying too quickly and cracking the floor. If the solid wood floor is not used for a long time, do not cover it with plastic sheeting or newspaper, because after a long time, the paint film will be sticky and lose its luster. At the same time, do not put hot water basins, hot rice cookers and other objects directly on the floor to avoid scalding the paint film.

4. Scrubbing. For daily cleaning, vacuum it and then use a soft cloth dipped in a dilution of a special detergent or soap flakes. For large area cleaning, it can be done with a sprayer or rotary cleaner. For natural lacquered solid wood floors, water is not good for it, so try to minimize excess water when cleaning, and be sure to wring out the rag when scrubbing.

Keep the surface clean and use gentle utensils to avoid surface damage;

Avoid scratches with sharp and hard objects;

Maintain proper ventilation with proper humidity. Strict water stains;

Use essential oils or floor waxes at intervals;

Today's finished wood floors have undergone advanced paint film technology when they leave the factory, and non-professionals are forbidden to consider sanding and painting will be self-defeating.

1. Keep the floor dry and clean, and avoid contact with a lot of water. It is not allowed to scrub with corrosive liquids such as alkaline water and soapy water to avoid damage to the paint film, and it can be wiped with a wrung out cotton mop, not with a wet mop, gasoline, flammable materials and high-temperature liquids. 2. Waxing every once in a while, the time interval depends on the finish of the floor paint.

The method is to first wipe the floor with a semi-dry rag and wax it. To spread evenly and "soak" the floor surface, wait for it to dry a little and then wipe it back and forth with a soft cloth until it is smooth and translucent. 3. If you accidentally pour water or leave water on the ground, you must wipe it with a dry soft cloth in time.

After wiping it clean, do not directly expose it to the sun or bake it on an electric stove, so as not to dry too quickly and the floor will dry and crack. 4. Do not throw cigarette butts or matches and other kindling on the floor to avoid scorching the surface of the floor; Avoid sharp, sharp objects, scratches, and heavy objects that are pressed for long periods of time. 5. After paving, the floor should be exposed to direct sunlight as much as possible, so as to avoid excessive ultraviolet radiation of the paint and early cracking and aging.

6. If the paved floor is not inhabited for a long time, it is necessary to open the window frequently for ventilation, and do not cover it with plastic sheets or newspapers. Over time, the paint film will become sticky and lose its luster. At the same time, do not directly contact the floor with objects with high temperatures, if the indoor air humidity is lower than 40, you need to increase the temperature appropriately, if the humidity is greater than 100, you need to take dehumidification measures.

In fact, you can ask the seller of wood flooring, go to the material market and ask, that is better!

Keep it dry and clean, do not rinse with a lot of water, and take care to avoid long-term immersion of the floor. If there are oil stains and stains on the floor, to remove them in time, you can treat them with warm water with a household soft neutral detergent, and it is best to clean it with a special floor cleaning protection solution that matches the floor. Do not touch the surface of the floor with corrosive liquids such as alkaline water and soapy water, and do not wipe the floor with flammable materials such as gasoline and other high-temperature liquids.

There is no need for waxing and painting, and do not use sandpaper to polish and polish, because laminate flooring is different from solid wood flooring, its surface is relatively smooth, and the brightness is better.

Avoid strong direct sunlight to avoid premature cracking and aging of floor surfaces. Keep your windows closed during the rainy season to avoid the rain soaking the floor. At the same time, it is necessary to pay attention to indoor ventilation, dissipate indoor moisture, and maintain a normal indoor temperature is also conducive to the extension of the life of the floor.

Hunan Jindian wood flooring for you to answer:

Cleaning and maintenance of solid wood flooring: 1. The humidity in the room should not be too large, keep the floor dry and clean, and wipe it with a wrung out cotton mop for daily cleaning: in case of stubborn stains, you should use neutral cleaning solvent to wipe it and then wipe it with a wrung out cotton mop, and do not use acid, alkaline solvent or organic solvent such as gasoline to scrub.

2. In daily use, pay attention to avoid scratching the floor with hard objects such as heavy metal sharps, glass porcelain tiles, shoe nails, etc.; Do not mop the floor surface when moving furniture; Do not expose the floor to an open flame or place a high-power electric heater directly on the floor; It is forbidden to place strong acidic and alkaline substances on the floor; Prolonged immersion is absolutely prohibited.

3. In order to maintain the beauty of the solid wood floor and prolong the service life of the paint surface, it is recommended to wax and maintain it twice a year. Wipe the floor clean before waxing, then apply an even layer of floor wax to the surface, and wipe with a soft cloth after a little drying until smooth and shiny.

4. If a large area of water is accidentally soaked or partially soaked in water for a long time, if there is open water retention, it should be blotted dry with a dry cloth in time and let it dry naturally, and it is strictly forbidden to use an electric heater to dry or expose it to the sun.

5. Long-term exposure to strong sunlight, or the sharp rise and fall of the temperature in the room may cause the premature aging of the paint surface of the solid wood floor, which should be avoided as much as possible.

6. If the place where the installation is completed is not for the time being, the indoor air circulation should be maintained, and it should not be covered with plastic paper or newspaper, so as to avoid the surface paint film sticky and tarnishing for a long time.

7. Clean the floor regularly and vacuum dust to prevent the accumulation of sand or frictional dust from scratching the surface of the floor. Shoe mats can be placed outside the door to prevent sand or rubbing dust from being brought indoors. When cleaning the floor, you can wipe it with a wrung out cotton mop.

Do not wipe the floor with a wet mop or corrosive liquids (e.g., soapy water, gasoline).

8. If the outdoor humidity is greater than the indoor humidity, the doors and windows can be closed tightly to keep the indoor humidity low, and if the outdoor humidity is less than the indoor humidity, the doors and windows can be opened to reduce the indoor humidity. In humid and muggy weather, you can turn on the air conditioner or electric fan.

9. In order to increase the indoor air humidity in autumn and winter, a humidifier can be used to keep the indoor air humidity at 50%-70%. 10. When moving furniture, it should not be pushed and pulled directly on the floor, but should be lifted and moved and placed gently. Furniture that is frequently moved can be glued with a layer of eraser at the bottom.