How to maintain solid wood flooring better?

The correct maintenance method is to ensure the normal use of the basketball court wood flooring fundamental, the stadium wood floor investment is large, the maintenance is difficult, the cost is high, the maintenance method is correct or not will directly affect the use of the wood floor effect and service life, daily maintenance to do:

1. It is strictly forbidden to wax the wooden floor of the sports field, according to the wooden products, waxing is the best general method to protect the wooden floor: but the wooden floor of the sports field has strict requirements for the surface friction coefficient, if the surface of the wooden floor is too smooth, the athlete in the process of sports, due to the reduction of friction and easy to cause the sole of the foot to slip, affecting the normal level of competition, and in serious cases, slipping accidents will occur, so the maintenance of the paint surface of the wooden floor of the sports field is not waxing. If an area is rubbed on the sole for a long time, the paint surface is polished, resulting in a reduction in the friction of the wood floor in the area, and it must be matted.

2. It is strictly forbidden to use solvent-based oil products to clean wooden floors, solvent-based oil products include: gasoline, kerosene, alcohols, esters and other products that dissolve the surface of paint, because solvent-based products will cause damage to the floor paint, and at the same time will reduce the friction coefficient of the paint surface, increase the finish and affect the normal use of the floor.

3. Floor ventilation holes, telescopic joints, sports equipment installation parts, etc. should be cleaned regularly, not blocked, and can be cleaned by vacuum cleaner or air compressor blowing. Clean the surface of the wooden floor with a vacuum cleaner regularly every day, use a wrung out non-drip mop to wipe the surface of the wooden floor, and increase the number of wipes in the dry season to ensure the appropriate air humidity in the venue.

1. Anti-fouling.

Every two or three months, you can apply floor wax to the floor. Before waxing, dust and dirt should be removed, and then a clean, lint-free soft rag dipped in wax, starting from one edge of the wooden floor, should be wiped in a ring on the board in turn. After wiping evenly, use the original rag (no longer dipped in wax) to wipe from the edge of the original wipe, and wipe it again in turn according to the above plan.

The waxed floor not only cleans and refreshes, but also protects the paint film and delays aging. When maintaining the solid wood floor, we must pay attention to keeping the floor dry and clean, and do not wet it with water or scrub it with alkaline water or soapy water, so as not to damage the brightness of the paint. If it is dirty or dirty, it can be wiped with a dry cloth.

It is also necessary to wax once a month, but wipe off moisture and stains before waxing.

2. Varnishing. Use.

After three or five years, the floor can be repainted with the same kind of paint as the original painted floor. In addition to dust and dirt removal before painting, a fine water sandpaper should be applied, dipped in warm water, and the board surface should be gently sanded to remove the remaining oil stains on it, and to grind off the small paint particles left in the last paint. After sanding, wipe it clean with a clean rag and you can apply the paint.

In this way, the painted floor will be smoother, cleaner and shinier.

3. Heat-proof. If there is a heating leak or water on the wooden floor, it must be wiped clean in time, and it cannot be directly exposed to sunlight or baked with an electric stove, so as to avoid drying too quickly and cracking the floor. If the solid wood floor is not used for a long time, do not cover it with plastic sheeting or newspaper, because after a long time, the paint film will be sticky and lose its luster. At the same time, do not put hot water basins, hot rice cookers and other objects directly on the floor to avoid scalding the paint film.

4. Scrubbing. For daily cleaning, vacuum it and then use a soft cloth dipped in a dilution of a special detergent or soap flakes. For large area cleaning, it can be done with a sprayer or rotary cleaner. For natural lacquered solid wood floors, water is not good for it, so try to minimize excess water when cleaning, and be sure to wring out the rag when scrubbing.

Oil wax solid wood flooring to remove black rubber wear marks and other stains that cannot be removed with water, can be removed with a soft cloth dipped in low concentration alcohol or a little liquor.

Take care of hardwood floors.

1. The humidity in the room should not be too large, keep the floor dry and clean, and wipe it with a wrung out cotton mop for daily cleaning; In case of stubborn stains, wipe with a neutral cleaning solvent and then wipe with a wrung out cotton mop, and never use acid, alkaline solvent or organic solvents such as gasoline to scrub.

2. Pay attention to avoid scratching the floor by hard objects such as heavy metal sharps, glass porcelain tiles, and shoe spikes during daily use of solid wood flooring; Do not mop the floor surface when moving furniture; Do not expose the floor to an open flame or place a high-power electric heater directly on the floor; It is forbidden to place strong acidic and alkaline substances on the floor; Prolonged immersion is absolutely prohibited.

3. In order to maintain the beauty of the solid wood floor and prolong the service life of the paint surface, it is recommended to wax and maintain it twice a year. Wipe the floor clean before waxing, then apply an even layer of floor wax on the surface, and wipe it with a soft cloth after it has dried slightly.

4. If a large area of water is accidentally flooded, or the local area is soaked in water for a long time, it should be drained as soon as possible after discovery, and let it dry naturally, and it is strictly forbidden to use electric heaters to dry or expose to the sun.

1. Solid wood floors are most afraid of water. Usually pay attention to waterproofing, keep the floor dry, if the water accidentally splashes on the floor, even if it is a small amount of water, wipe it with a soft rag in time. 2. Pay attention to fire prevention, unextinguished cigarette butts and match sticks should not be thrown on the ground at will, electric stoves, rice cookers, electric irons, electric soldering irons, etc., it is best not to put them directly on the floor.

3. Solid wood flooring is easy to damage. Pay attention to the cleanliness of the floor. Distinguish the nature of the dirt and then use different methods and different detergents to clean it.

4. About three months of last wax, about three years of last paint.

It is recommended to install electric underfloor heating under the solid wood floor. The only electric floor heating brand in the world that can make solid wood flooring - American Tyco Raychem brand!!

Guangzhou Lianghuo Floor Heating Co., Ltd. specializes in floor heating suitable for composite flooring, solid wood flooring, marble and ceramic tiles.

The principle of self-regulating materials for solid wood flooring:

As the ambient temperature rises, the heating element undergoes microscopic expansion, and the number of conductive channels composed of carbon atoms decreases, and the resistance of the heating element increases, thereby reducing the heat generation.