Can the solid wood floor be restored from soaking in water and drumming?

Updated on Solid wood 2024-08-05
3 answers
  1. Anonymous users2024-01-24

    It can be restored, and now many companies are doing this business, saying that it is okay:

    1. Floor grinding and renovation.

    The wooden floor is worn and worn after a long period of walking, hard scratching, hard pressing, deformed by the influence of high and low temperature, the paint surface is damaged, and black black marks appear on the surface, so it needs to be renovated. During the renovation, it is not possible to use electric planers, belt sanders, etc., and should use a special wood floor sander for grinding and polishing. It can be colored, seamed and painted.

    According to the characteristics of the wood, transparent putty and primer are selected. Generally, the floor paint should be painted about five times, and the sports venues and public places should be increased on one to both sides. The amount of paint is about 10 square meters per kilogram.

    2. Floor blister treatment.

    In daily life, the living room sometimes suffers from "flooding" caused by leakage of pipes, resulting in serious consequences such as water soaking on the floor. What should I do if I encounter this situation? After the floor is soaked in water, it can be divided into the following two situations according to the severity:

    Large areas of water soaking (cracked water pipes, leaking heating pipes); Local soaking (water pipe leakage, hidden pipeline water seepage, heating pipe leakage, water dispenser leakage, bathtub leakage, etc.). After soaking in water, the floor will be warped at the floor joints and the skirting board will be deformed and bulged, etc., in case of similar situations, you can deal with it according to the following steps: 1

    find and cut off water sources in a timely manner; 2.Clean the floor of the water; 3.Notify the property and related manufacturers in a timely manner; 4.

    Photographs of the scene are taken to serve as evidence in the event of a dispute. Repair methods for different situations.

    In general, in addition to the bathroom and kitchen, the rooms are generally not waterproofed, so it is necessary to clean up the water on the ground as soon as possible to avoid leakage downstairs and cause greater losses; If there is a large area of water soaking on the floor, and the amount of water is large, the floor manufacturer should be notified while cleaning the site, and strive to remove the floor in the shortest possible time; If it is a partial soaking in water, the water source should be cut off immediately, after cleaning the ground, observe whether there is any change in the floor, if there is an obvious warping reaction, the floor manufacturer should be notified for partial replacement.

    If the floor needs to be partially replaced, it is necessary to check the inventory and batch of the floor to be replaced before the worker comes to the door, because the floor can only be used with the same color and specification as the original floor, otherwise the effect will be very unsatisfactory.

    I haven't dealt with such a problem either, you can try to contact the manufacturer of wood flooring.

  2. Anonymous users2024-01-23

    Whether you don't eat or do exercise, the most important thing is to persevere, in fact, any method is effective, it just depends on whether you can stick to it.

  3. Anonymous users2024-01-22

    1. On-site inspection.

    Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. Inspect the soaking site at the first time to eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor, etc.

    Then according to the degree of water immersion of the sports wood floor, a solution is formulated.

    2. Soak in water lightly.

    If the sports wood floor is lightly soaked, the lightly soaked and damp floor can be wiped dry and ventilated. If necessary, disassemble the sports wood floor to observe whether there is water on the ground and observe whether the floor is obviously deformed. If so, it needs to be removed and dried, and reinstalled.

    3. Heavy soaking.

    Sports wood flooring that is seriously damp or soaked in water for 30 minutes will be deformed, expanded, and lost its luster. Such sports wood flooring is basically scrapped and should be replaced, and attention should be paid to removing the moisture under the floor and drying it.

    4. Precautions.

    After the sports wood floor is soaked in water, it is important to pay attention to the fact that it cannot be blown by hair dryer, exposed to sunlight, or dried, which will accelerate the serious deformation and damage to the surface of the sports wood floor of the basketball hall.

Related questions
2 answers2024-08-05

1. On-site inspection.

Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. The first time to inspect the soaking site, eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor. >>>More

3 answers2024-08-05

Sports wood flooring is soaked and swollen by water: sports wood flooring is water-abore, and the sports wood floor after being soaked in water is easy to swell and deform, which directly affects the use of sports wood flooring. Generally, when encountering this kind of problem, do not remove the wooden floor without permission, and contact a professional wooden floor installer to repair and deal with it according to the soaking situation.

3 answers2024-08-05

The solid wood floor does not bulge in the water for half a year, which is the relationship between the wood soaked in water, when the wood gradually dries in the process, due to the uneven force on all sides, the surrounding will be upturned. Or it will bulge upwards in the middle.

4 answers2024-08-05

There is no problem with thermal expansion and cold contraction flooring, there is a problem with installation, and the floor should be installed with a gap of 8mm on the wall, and then covered with a baseboard, so as to expand and shrink the cold, it is estimated that there is no gap on the side of the wall, and it will bulge when it rises. Or the single-zone floor pavement area is too large, and there are no expansion joints for the sake of aesthetics.

3 answers2024-08-05

Hardwood flooring is a high-grade flooring material that is highly regarded in home decoration. However, if the solid wood floor is accidentally soaked in water, it will cause great damage to the floor, and even lead to deformation and mildew of the floor. So, if the hardwood floor is soaked in water, what should we do about it? >>>More