-
Anonymous users2024-01-24If the solid wood stair tread board and kicking board are to be installed on the cement staircase, the wood blocks need to be embedded in the cement staircase in advance. The cube with a wooden block size of 30 30 30mm needs to be soaked in black oil before being buried, and then embedded on the cement stair tread surface and kicking surface, and two pieces are placed on each side. When installing the plate, use wood screws to attach the tread plate and the kicking plate to the embedded wooden block.
If the cement staircase that has been formed cannot be pre-embedded, the electric hammer is used to drill holes in the stair tread surface and the kicking surface, and then the expanded wood screw buckle is placed, and then the tread board and the kicking board are connected with wooden screws.
-
Anonymous users2024-01-23If the pedal and kickboard are made of stairs, there should be a groove under the front of the pedal, and there should be a centimeter edge above the kickboard. The edge of the kick plate is stuck in the groove when it is installed, and then the nail is hammered with an air nail gun in a place that can be covered, such as where the thickness of the inside of the pedal is connected to the kick plate. After nailing, you can use floor glue to glue.
-
Anonymous users2024-01-22Indoor installation: It is necessary to nail the keel or nail the bottom of the wooden board before installation;
Outdoor installation: If it is a thin plate, you can frame the keel first, and then install it; If it is an outdoor anticorrosive thick plate, it can be directly fixed with an expansion bolt.
You can ask the installer to purchase the specific materials for you.
You can choose the way of slotting, slotting under the pedal, slotting above the side plate, pay attention to the slotting to open the pedal and the side plate just can be stuck together. When installing, you can paste it with white latex, which is more complicated, especially for the master.
Paint-free ecological board refers to the inner substrate is uncertain, there may be plywood, particleboard, moisture-proof board, etc., advantages: smooth surface, not easy to deform, bright color, surface more wear-resistant, corrosion-resistant, economical. The inner core of the solid wood multi-layer paint-free board must be solid wood, which is a core made of natural wood strips bonded, advantages: >>>More
Difference 1: Different types.
Ecological board, also known as paint-free board, melamine board. Compared with other boards, the obvious advantage of eco-board is that it is paint-free, does not need to paint, reduces the emission of toxic and harmful substances caused by paint, and is more environmentally friendly, safe and durable. >>>More
Generally speaking, solid wood paint-free board is more environmentally friendly than particleboard, but many foreign particleboard is more environmentally friendly than paint-free board I recommend to you the best domestic paint-free board company, Dawang Coconut Group, the national paint-free board standard is he participated in drafting.
Solid wood boards are better!! Paint-free board, the effect is not as good as that of solid wood board, the important thing is that the paint is healthy paint, don't worry!! You can consider it!! Hope it helps!!
There are generally a variety of names for ecological boards, common names are paint-free boards and melamine boards, generally many of the boards that achieve ecological environmental protection can also be called ecological boards, generally speaking, paint-free boards are new environmentally friendly decoration materials, which are decorative boards made by putting paper of different colors or textures into melamine resin adhesive and soaking and drying to a certain extent and other solid wood boards by hot pressing.