-
Anonymous users2024-01-24Yes, but there is no need for this, the ordinary wiping method will do it, and it will not fall off, and it will be troublesome to remove.
-
Anonymous users2024-01-23If you use a square plate, you can operate it yourself, and you can complete it with a suction cup, and it is more difficult to disassemble the aluminum gusset of the strip by yourself, so consider it carefully.
-
Anonymous users2024-01-22Aluminum gusset is a new type of decorative material that has emerged in recent years, it has the characteristics of lightweight, water-resistant, non-vacuuming, corrosion-resistant, easy to scrub, easy to install, strong three-dimensional sense, soft color and beautiful and generous, and is a completely environmentally friendly material. However, his installation requirements are high; The seam is not as good as plastic steel; There are not as many plate types and styles as plastic steel.
No, do you mean to keep a piece for later?
The corner line is re-fixed horizontally, and the aluminum gusset is inserted according to the track surface.
If the clip is not good-looking, put a large half of the same width at both ends, and the symmetry will look better.
It is estimated that it was caused by the damp weather.
It should be that the putty of the top layer of the suspension is not approved, resulting in the gap between the putty layers, and the putty layer falls down with the paint, and the paint and putty layer can be shoveled off and re-embedded.