-
Anonymous users2024-01-24Wooden partitions are sufficient. Moisture protection is not a problem. The construction of the wood structure is convenient, and there is no need to make a steel structure if the bay is small.
If the Venerable Master: the skeleton is 60*120, and the Venerable Master: 60*90 fallen leaves, it is best to use the old formwork and multi-layer board (with paint) from the construction site as the surface layer. Below the normal ceiling, install an exhaust fan.
-
Anonymous users2024-01-23I think using channel steel is the most cost-effective! The price is cheap, and the load-bearing capacity can generally reach 300KG per square meter, and after building the channel steel, you can first lay the woodworking board on it to make the base layer! After you have a base layer, you can lay the floor if you want to, or you can not pave it!
If it's safe to do so, the higher you add, the less you can smell it, and the ventilation cap of the sewage pipe on the roof of the building is two meters high.
If the bathroom is not flushed and cleaned in time, it must be smelly, and if you rule this out, then check the water seal of the sink, floor drain, and toilet.
It depends on your own thoughts, if you live in the attic, you need to go downstairs to solve the toilet, and it is inconvenient for you.
Storage tools are very important, it is recommended that you classify the sundries functionally, and then choose some storage boxes that can be separated or waterproof shelves such as colorful years for storage, so that it will not be messy at a glance.
Someone who understands design should check out the scene of your home. Then give design advice. At the very least, you need to know where the water comes from and where it goes down.