Before the bathroom brush is waterproof, the pipe root is not used to plug the leakage

Waterproofing depends on the situation, the drainage tap channel can not be sealed, and the wall also depends on the situation, for example, the bathroom has a wall shared with the hall or bedroom, then it must be waterproof, and the general bathroom must be waterproof, unless there is no shared wall on all sides of the bathroom and there is no circuit passing.

In terms of the purpose of the toilet, there are two sections of toilet and other areas and the bathing area, and the bathing area is relatively humid, so the area should be waterproofed. >>>More

It must be done, when doing waterproofing, the wall in the toilet is best done in the house to be two meters high, so that it is moisture-proof, even if you stick tiles in the future, you must use SBC to do waterproofing, use other non-anti-aging, the decoration company will give you a brush of waterproof paint generally, so that the closed water experiment is fine, but it will definitely be over after a long time. Remember to always use SBCs. Oh.

When it is said that it is the storage of water of the waterproof closed water test, it is necessary to discharge. After this waterproofing is done, you need to do a closed water test, and after passing the water, the water is generally directly discharged, and it is paved after 2-3 days, and the water needs to be discharged if it is not directly paved.

It is best to have a window countertop in the bathroom;

In general residential buildings, the height of the window is about meters, the height of the window sill is about meters, and the height of the top of the window from the floor is about meters. If the height of the window sill is less than the meter, pay attention to take protective measures. The width of the window passes. >>>More