-
Anonymous users2024-01-24If you use a range hood or exhaust fan to exhaust the air, open the window to get the air while exhausting the air outward, in this case, the suction pressure of the fan is the smallest and the exhaust air volume is the largest.
-
Anonymous users2024-01-231. Installation method of kitchen exhaust fan.
First of all, it is necessary to understand that when installing an exhaust fan in the kitchen, the position should be as low as possible, and the exhaust fan requires a relatively large wind, at least more than the wind power of the intake fan.
2. Preparation before the installation of the kitchen exhaust fan.
The first thing to do is to inspect the exhaust fan to see if the new exhaust fan is broken or has quality issues. Check the installation environment, and generally do not place too large obstacles at the place where the air outlet is meters to 3 meters.
3. Installation method of kitchen exhaust fan.
When installing, it is necessary to make the exhaust fan stable, and at the same time, pay attention to whether the exhaust fan is in the horizontal direction marked before, so that it is not easy to appear skewed, high and low, etc., and it will be unsafe to use in the future, and it will also affect the use effect.
4. After the installation of the exhaust fan is completed.
Finally, after the installation is over, the exhaust fan should also be inspected to see if the sealing around is very good.
-
Anonymous users2024-01-22You can learn about the transformer type five anti-pull-out valve.
Kitchen Feng Shui Treasure Tip 1
1. The wall of the kitchen should be easy to clean, not easy to be stained with oil, and should also have the functions of fire resistance and heat deformation. The kitchen smoke is very large, especially the Chinese like to fry and fry, pay attention to the "fire furnace gas", so that the kitchen smoke stains are difficult to remove. Therefore, the surface material of the four walls should have a good ability to resist oil stains and oil smoke, so as to keep the surface clean for a long time. >>>More
Is it a poor main pipe or a poor plumbing in your house? If it is a main pipeline, it must be found to dredge the pipeline, if it is the fine point of your home pipe is not through, it may be caused by long-term use of the pipe wall oil, boiling water and flushing the sewer pipe can remove the oil.
If it is not smooth, it is possible that the pin base is thick and blocked. A recommended method: use hot water to make alkaline noodles and dish soap to make an aqueous solution, and rinse the greasy front dirt inside the pipe, which is conducive to dredging!
Only to improve the breathability Don't listen to their nonsense, open the refrigerator The refrigerator needs a lot of heat dissipation outside the refrigerator to cool up, and opening the refrigerator will only make it hotter.
In this case, it may be that the installation was reversed. Take it off and reinstall it.