How to buy a water saving toilet

The amount of flush volume is not necessarily as small as possible, and the degree of flushing should be considered.

Step 1: Weigh the weight.

Generally speaking, the heavier the toilet, the better, the average toilet weight is around 25 kg, while a good toilet is about 50 kg. Heavy weight toilets have high density, solid materials, and good quality. If you don't have the ability to pick up the entire toilet bowl and weigh it, you might as well lift the lid to weigh it, as the weight of the lid is often proportional to the weight of the toilet.

Step 2: Calculate the capacity.

For the same flushing effect, of course, the less water used, the better. The sanitary ware sold on the market is generally marked with water consumption, but have you ever thought that this capacity may be fake? In order to fool consumers, some unscrupulous merchants will label the actual large water consumption of the product as a small amount, so that consumers fall into a literal trap.

Therefore, consumers need to learn to test the real water consumption of the toilet.

Bring an empty mineral water bottle, close the toilet inlet faucet, after draining the water in the water tank, open the water tank lid and use the mineral water bottle to manually fill the water tank, according to the capacity of the mineral water bottle, roughly calculate, how much water is added after the water inlet valve in the faucet is completely closed? Check whether this water consumption matches the water consumption labeled on the toilet.

Step 3: Test the water tank.

In general, the higher the height of the tank, the better the impulse. In addition, the flush toilet tank needs to be inspected for leakage. You can drip blue ink into the toilet tank, stir well and see if there is blue water flowing out of the toilet outlet, if so, it means that there is a leak in the toilet.

Step 4: Consider the water parts.

The quality of water parts directly affects the flushing effect and determines the service life of the toilet. When purchasing, you can press the button to listen to the sound, and it is best to make a crisp sound. In addition, it is necessary to observe the size of the outlet valve in the water tank, the larger the valve, the better the water discharge effect, and the diameter of more than 7 cm is better.

Step 5: Touch the glaze.

A good quality toilet has a smooth glaze, a smooth and smooth appearance, and a soft color. We should use the original reflective to observe the glaze of the toilet, and the unsmooth glaze is easy to show under the light. After inspecting the glaze of the outer surface, you should also touch the drain of the toilet, if the drain is rough, it is easy to trap the dirt.

Wrigley's toilets are all national standard water-saving toilets, and you can take a look at the official flagship store of Amazon Wrigley.